New Model: De Alm Grand Voyager 65

Jachtbouw De Alm has launched its first hull of the Grand Voyager 65 model. The new 65 is an extension of the Grand Voyager series from Jachtbouw De Alm, in addition to the existing 62 and and still in project 74 model. The Grand Voyager 65 has been designed to organize the spaces as efficiently as possible, in both indoor and outdoor areas. The exterior offers three distinct areas; flybridge, foredeck and aft deck. The flybridge offers a helm station to starboard, while the whole are can be ordered to customer`s wishes. The foredeck is equipped with a forward settee dinette and a lovely sunbed further forward, while the aft deck has a spacious sofa with table and an extra-large swimming platform. Light oak with dark American walnut finishes was chosen for the first Grand Voygaer 65, which welcomes you onboard with L-shaped lounge with entertainment area opposite, while further forward and one step up is the pilot house with a central helm station and entered from the starboard side. Lower deck layout offers three cabins all with private en-suite bathroom. The master stateroom is located forward and apart having a private en-suite head, and also features a separate shower room to starboard. The two other guest cabins are located at midships and both feature a rail system, that converts to two single beds to a double. In between the cabins on the lower deck is also an L-shaped dinette to port side, with a spacious galley opposite. A single berth crew cabin is located aft to port side  The De Alm Grand Voyager 65 is powered by twin Volvo 300hp with line shaft propulsion for top speeds up to eleven knots.

Technical Data:

LOA - 19.95 m (65.4ft)

Waterline Length - 19.6 m

Beam - 5.65 m

Draft - 1.65 m

Displacement - 65 t

Fuel Capacity - 2 x 2700 l and 1 x 1600 l

Water Capacity - 1200 l

Accommodation - six berths in three cabins, one crew cabin berth

Engine - 2 x Volvo D6 300hp

Propulsion - direct line shaft 

Speed - eleven knots max, nine knots cruise

Hull Shape - round bilge displacement

Construction - grade A steel with 8, 6, and 5 mm thickness, hull painted in Awl-Grip

Project - Werner, Azza 

Certification - CE A

www.alm-jachtbouw.nl