November 11, 2016

Project: Wim Van Der Valk 600 Beachclub

Wim Van Der Valk presents this new innovative project designed by Cor D.Rover for a 600 Beachclub model.  Cor D.Rover presented an innovative unedited layout for the 600 Beachclub which will feature two living areas, one on the main deck by the pilot station, and the second astern which can open up to the sea and become a beach club.  The fore deck part of the lower deck will feature three guest cabins with the owners room to fore.  The Van der Valk 600 Beachclub will feature a semi planning hard chine Vee-shape hull and will be built of aluminium.  The 600 Beachclub will be powered by twin Volvo 725hp engines coupled to IPS pod propulsion which will give a cruise speed of 19 knots.  
www.vandervalkshipyard.com

November 10, 2016

New Model: Sea Ray 460 Sundancer

Sea Ray continue its wind of change as started in 2013 with the launch of the 510 Fly model.  Three years later the renovation to its upper sizes continues and this time around it is for a new 460 Sundancer, a project which was presented to the dealers as 450 during the Summer 2016 period.  With the new Sea Ray 460 Sundancer the famed USA boat builder takes customer choice to a new level with important options to the customer from five hull colors, interior layouts for two or three cabins, line shaft V-drive or ZF Zeus pod drives, and optional larger fuel capacity for an extra two hundred liters.  Putting all this togather the Sea Ray 460 Sundancer can really become a tailor made sport cruiser.  Design wise the Sea Ray 460 Sundancer is very much in many areas of its design European inspired, from the large hi-low lift bathing platform, to the astern galley, living located on the main deck, and last but not least a cabin area all located on the lower deck.   
Technical Data:
LOA - 14.22 m (46.8ft)
Beam - 4.32 m
Draft - 1.4 m
Displacement - 14,966 kg with line shafts, 16424 kg with ZF Zeus drives
Fuel Capacity - 1419 l, or optional 1638 l
Water Capacity - 454 l
Accommodation - 4 berths in 2 cabins, 6 berths in 3 cabins
Engines - 2 x Cummins QSB 6.7 550hp
Propulsion - line shaft with V-drive, or ZF Zeus aft looking dual propeller pod drives
Hull Shape - modfied Vee with spray rail and 17 degrees deadrise aft
Certification - ABYC, NMMA, CE

Project: Rose Island 16.65 m Giano MkII

Rose Island add another project to its Giano series, what the Italian boat builder refers to MkII model.  Contrary to usual belief the Giano MkII, is not a newer version of the 12 Giano but a totally different bigger model measuring over sixteen meters in length.  The Giano MkII is based on Rose Island's 58 Pathfinder hull and will feature the same innovative semi planning with directional central keel bottom.  The design upwards of the main deck, pilot house is completely new.  The hull shape of the Giano MkII has some interesting numbers going on the plane at just eleven knots and reaching max speeds up to 25 knots powered by only twin 450hp engines.  Rose Island is not giving any layout details for the Giano MkII, still I would expect a three double cabins plus crew cabin on the development of the 58 Pathfinder.

November 9, 2016

New Model: Tecnomar Evo 55 Open

Sometimes a builder comes with a design which is out of the ordinary, and while all these innovative looking boats seem to get the input from the 2003 big Wally Power, recent new boats are going beyond the copy paste realm.  The new Tecnomar Evo 55 Open designed by Gian Marco Campanino is such a design. The Italian designer for the Evo series seem to have gotten inspiration from a sci-fi movie with the exterior of the Evo 55 Open looking like a chameleon coming out of the water.  Looking standstill the Tecnomar Evo 55 looks like it is looking at you.  Campanino has to be commended for an interesting out of the ordinary design, such it is that we forget that the Evo 55 sees Tecnomar returning to the smaller sizes sub 24 meter, something which the yard has not been doing for quite some time. Still important to note that Tecnomar returns to smaller sizes with its usual custom identity it had since founded in the mid eighties with the Evo 55 Open offering three lower deck choices, optional crew cabin and a different Hardtop model availability.       
Technical Data:
LOA - 16.5 m (54.1ft)
Beam - 4.7 m
Accommodation - 2 guests, or 2 + 2 berths in 1 seperate cabins, optional single crew cabin
Engines - 2 x Volvo D11 725hp, D13 900hp
Propulsion - Volvo forward looking IPS pod drives
Speed - 40 knots max with Volvo 900hp units
Project - Architect Gian Marco Campanino

November 8, 2016

Project: Viking 48 SC

Viking continues to expand the 48 series and presents the range with more projects after the launch of the Convertible and Open models.  When the 48 series will be complete will be seeing a four model line up offer all catering to different clientele needs.  This time around Viking presents the project for the 48 SC, these last initials standing for sport cruiser. The 48 SC is very much the same to the Open in layout, with the difference of a three part hard top protecting the center cockpit of the main deck. The Viking 48 SC is on paper the most cruiser friendly model of the series, without forgetting that its DNA is still that of a sport-fishing machine, its aft deck is open, and the mezzanine settees are there.  

New Model: Riviera 575 SUV

Riviera presents the new 575 SUV what is a further development of the 565 with some technical differences. It is more or less the same size and the exterior and interior are not any different. Look skin deep though and you start finding a larger fuel tank; five hundred liters plus, a boat which displaces four tons more dry, and most important a choice for eighter IPS pod drives or line shafts propulsion. This last choice allows for a Cat 1000hp engines installation. So how do you recognize a 565 from a 575? The notable exterior design difference is the engine air intake to the side which comes in a more smooth profile on the new 575 SUV. 
Technical Data:
LOA - 18.5 m (60.8ft)
Hull Length - 17.2 m
Beam - 5.13 m
Draft - 1.55 m incl props
Displacement - 27,400 kg dry
Fuel Capacity - 4000 l
Water Capacity - 750 l
Accommodation - 6 berths in 3 cabins
Engines - 2 x Volvo D 727hp, D13 900hp, Cats C12.9 1000hp
Propulsion - Volvo forward looking IPS pod drives. or line shafts
Speed - 30 knots max, 25 knots cruise with Cat 1000hp and line shaft choice
Range - 437 nm at 25 knots

November 7, 2016

Project: True North 50

True North present the project for a 50 flagship designed by Lanagan out of Newport Rhode Island.  It is not the first time True North tries to go into bigger sizes with a new flagship, with the North US builder presenting a project for a 47 in 2009 which never materialized.  The times where difficult back then, now with the TN 50 is hoping that the Warren Rhode Island builder manages this time around with this completely more modern looking new project.  The True North 50 will also be available in a flybridge option variant and mixes Down East lobster boat lines into that of a comfortable two cabin yacht. The True North 50 is to be powered by twin Volvo 435hp engines with IPS pod drives propulsion, and will feature a modified medium Vee shape hull which closes at 17 degrees deadrise aft.  

New Model: Gulf Craft 65 Nomad

Gulf Craft Nomad range has been slowly expanding and today the range is a complete line up from 55 up to 95 feet.  The Nomad range is an answer to customers looking for a semi planning motor yacht with medium cruising speeds.  The new Nomad 65 sits at the middle of the range and offers some incredible spaces for a yacht measuring twenty meters.  The 65 Nomad accommodation plan will offer three double cabins, plus a crew cabin berth aft.  All the living is located on the main deck; saloon, galley, dining and will also include a day head.  The Gulf Craft 65 Nomad by understanding is the smallest craft with a day head on the main deck.  Power for the Nomad 65 comes from twin 800hp standard engines, or optional more powerful 1150hp units.
Technical Data:
LOA - 20 m (65.9ft)
Waterline Length - 17.5 m
Beam - 5.53 m
Draft - 1.39 m full load  
Displacement - 32 t 
Fuel Capacity - 5678 l
Water Capacity - 757 l
Accommodation - six berths in three cabins, 2 or 1 crew berths in 1 cabins
Engines - 2 x 800hp, 1150hp
Propulsion - direct line shaft
Speed - 25 knots max, long range cruise at 10 knots
Range - 1600 nm at 10 knots

November 5, 2016

New Model: Numarine 105 Hardtop

Numarine is looking at important growth in recent couple years with 2016 being an important establishing year for the Turkish boat builder. For 2016 Numarine launched the 105 Hardtop, a 2013 project which is seeing the construction of a second unit as we speak.  Currently the largest Numarine launched the 105 Hardtop surprises for its vanguard different looks outside, and an interior with a very large midships owners stateroom, two VIP suites, and a guest cabin with double french beds forward.  The crew lobby is located to midships and will also feature three double cabins a lobby and the galley.  The Numarine is standard powered by twin Cats 1825hp giving 31 knots top speed.
Technical Data:
LOA - 32.94 m (108ft)
Hull Length - 30 m
Beam - 7.1 m 
Draft - 1.95 incl props
Displacement - 74 t light, 98 t loaded
Fuel Capacity - 12700 l
Water Capacity - 2400 l
Accommodation - 8 guest berths in 3 cabins, 6 crew in 3 cabins
Engines - 2 x Cat C32 1825hp, MTU 16V2000 M93 2400hp
Propulsion - line shaft with ZF gearbox
Speed - 31 knots max, 26 knots cruise with standard Cats 1825hp
Range - 500 nm at best cruise
Construction - vacuum infusion Vinilester resin PVC foam core, multi-axial unidirectional E-glass

November 4, 2016

Project: C.Boat 28 Explorer S

C.Boat from Sicily is a shipyard which is continuing to grow and here it presents a just sold new project which had its keel laid in early October 2016.  The C.Boat 28 Explorer S will feature important technical content and sees the Italian builder colloborate for the first time with Sergio Cutolo and his Hydro Tec studio.  A naval architect who has seen his rating go higher in this decade and is at the prime spot for builders or owners wanting an explorer adventure yacht.  The C.Boat 28 Explorer S is a tug boat looking super yacht with three decks and a flying bridge up top.  For its size and type the 28 Explorer S will suprise for its spacious exterior areas, as the aft deck or the space available in both bridges; second deck and up top on the fly.  The 28 Explorer S will feature three guest cabins below deck, while the owners suite is to be located on the forward part of the main deck. Launching for the C.Boat 28 Explorer S is for the first half of 2018. 

New Model: Segesta 50 Capri

Segesta is a fairly young Italian company being founded in 2009 by four Italian entrepreneurs and now it launches its first 50 Capri model. A fully custom hand crafted build to order traditional motor yacht, the Segesta 50 Capri is designed by Carlo Borghi who inspired himself to a mix of early seventies Italian sportfish cruisers like the early Alalunga's or some of the recent nineties build Castagnola models.  Tradtional both outside and inside, its three double cabins interior with forward owners suite, and two guest cabins at midships are again a shout to the past as is the wood filled finished interior.  But do not be mistaken while the Segesta 50 Capri is fairly classic looking outside and inside; it can be ordered with a technoligical heart of quadruple hybrid propulsion drive of four 200 kw electric motors, these giving a range of clean power for two hours at ten knots.  These electric motors are an optional addition to the twin FPT 650hp engines giving a 33 knots max speed, and when ordered reduce fuel capacity by one thousand liters.  
Technical Data:
LOA - 15.6 m (51.1ft)
Beam - 4.3 m
Draft - 1.5 m
Displacement - 12 t light
Fuel Capacity - 2500 l, 1500 l in hybrid option
Water Capacity - 500 l
Accommodation - 6 berths in 3 cabins
Engines - 2 x FPT Cursor 9 650hp, optional addition of 4 x 200 kw electirc motors available
Propulsion - line shaft
Speed - 33 knots max 25 knots cruise
Project - Carlo Borghi
Certification - CE A

November 3, 2016

Project: Storebro 460 Commander

Storebro present the project for a new 460 Commander a result of careful development combined with respect for traditional values, and genuine craftsmanship with a long nearly seventy years history.  The 460 Commander presents as the most modern looking Storebro ever made and will also offer sunnier climates ammenities as the fully extended flybridge.  The Storebro 460 Commander will also offer full walk around side decks.  Details are still very much spread thin with no details on engine choices and internal layout details.

New Model: Sea Ray 355 Sundancer Coupe

Sea Ray introduces the new Sundancer 350 Coupe, a new addition to this North American builder iconic series. Looking very Europe outside with its sleek hardtop and enhanced coupe fore-deck seating lounging zone, Sea Ray 350 Sundancer Coupe shows its American DNA in its open plan accommodation layouts. The 350 Sundancer Coupe will also feature a bathing platform bbq area, something akeen of bigger boats, and its cockpit area surprises for transformation settees which turn and at anchor or in the marina become part of the entairtainment.  The Sea Ray 350 Sundancer Coupe also offers flexibility with options which make life onboard better as the extended bathing platform, and a technical choice of stern drive or line shaft propulsion.
Technical Data:
LOA - 11.45 m (37.6ft) with optional extended bathing plaftom
Length - 10.6 m
Beam - 3.45 m
Draft - 1.4 m with drives
Displacement - 8525 kg dry
Fuel Capacity - 810 l
Water Capacity - 151 l
Accommodation - six berths
Engines - 2 x Mercruiser 6.2l Mag MPi 350hp, 8.2l Mag ECT 380hp gas petrol, Mercury 4,2l TDi 370hp diesel  
Propulsion - Mercruiser Bravo Three dual propeller stern drive, or V-drive line shaft
Hull Type - planning modified Vee with twenty degrees deadries
Certification - USCG, ABYC, NMMA, CE

November 2, 2016

Project: Cruisers 54 Fly

The formula for the project of the Cruisers 54 Fly is the same the North American boat builder used for its 60 Fly model.  Basically Cruisers is using the 54 Cantius base and adding a flybridge up top.  Fair to say this system has worked incredibly well for Cruisers in the flagship 60 series, so the same result is expected for the 54 Fly.  Both series are a design to Beglian born USA resident Facheris, and the 54 Fly just as the hard top sport yacht Cantius is to be powered by the same twin Volvo 725hp engine with IPS propulsion. 

November 1, 2016

New Model: Rio 44 Colorado

Rio continues expanding and for 2016 the North Italian Brescia pleasure boat builder presents the 44 Colorado, a fourteen meter enclosed hard top sport cruiser with intelligent exterior spaces and a spacious three double cabin interior.  So far it is not clear if the 44 Colorado is a replacement to one of the 42 and 46 Air models.  Looking at the plans and technical content one understands that the three similar sized models which share hull can co-exist cause of the differences; see fully open hard top two cabins and IPS propulsion for the Air models. The Rio 44 Colorado has interesting layout solutions usually found on larger boats.  For example its flash main deck and the three part patio door can become an all open area of eight square meters. But the surprises of the Rio 44 Colorado do not stop, as the fourteen meter sports cruiser surprises again for its three double cabins below deck, which still features a spacious full beam owners suite.  This is in addition to a VIP cabin forward, bunk third cabin to starboard, and L-shaped sofa to port side. The galley of the 44 Colorado is located on the main deck behind the helm station to starboard.  Power for the new Rio is standard Cummins 480hp with line shaft propulsion, or optional Volvo 370hp coupled to stern drives propulsion.  
Technical Data:
LOA - 14.11 m (46.2ft)
Beam - 4 m
Displacement - 12500 kg dry
Fuel Capacity - 1400 l
Water Capacity - 330 l
Accommodation - 6 berths in 3 cabins
Max Persons - 12
Engines -2 x Volvo D6 370hp, Cummins QSB 6.7 480hp
Propulsion - Volvo DPH dual propeller stern drives, or line shaft 
Project - Marino Alfani

blogger - Lost Chance

The important European boat shows for 2016 have ended with Cannes taking again the prime spot of the must show to visit.  Still this was a lost chance for Genoa to regain its leadership in the European boat show panorama.  
Genoa 2016 was good but the fracture between UCINA and Nautica Italiana is still hurting the boat show to regain its prime spot.  This is a pity as 2016 could have been the one of the full relaunch of the Genoa boat show.  It was a relaunch but not a full one. A half filled glass that is. When you have names as the Ferretti Group and Azimut-Benetti missing, it is fair to say that the Genoa boat show is not the same.  The Italian names missing in Genoa need to figure that even if they invest double in Cannes it can never be the Home boat show.  Basically to make an example when at Cannes they are always playing away.  
Genoa is the prime spot for Italian builders with some of them having the yards a few miles away from the show.  If you are interested in a boat the next day they can set you an appointment in the yard to have a look at the facility and how the construction process works. This alone makes Genoa unique for Italian builders.  
Italian boat builders snubbing the Genoa boat show need not to look far away at how for example the British support the home boat shows, Southampton the first but also the London January edition due to the advantage a home boat show gives you. Same goes for the Dutch with Hiswa boat show.  
Both the Brits and Dutch supported the Home boat shows even when these performed under expectations.  A prime example to this is the London boat show, who has been in decline for over a decade now, but has always received the full support of the British boat builders even in the worst of times. 

October 31, 2016

Monthly News - October 2016

-pic of the month- Riviera Rendezvous in America

Austin Parker Global Future

The intensive media coverage which followed the production agreement with American firm Chris-Craft has projected the Austin Parker brand into the international spotlight in a way that has quickly brought concrete benefits. The Italian builder, based in Pisa and already represented in several European countries, Asia and the United States, is opening new sales agencies in Portugal, Sweden, Belgium, Australia and New Zealand. This marks a fitting end to 2016, a year of decisive importance for all Austin Parker's future growth strategies: engaged on a large-scale renewal program which began three years ago and is still ongoing, the firm is now focusing its attention on a new line of yachts which will keep faith with the "family line" that has brought it such success. This line, larger in size, will target a more select, prestige clientele. The first model to be presented, the 74 Fly S, scheduled for completion by the end of next year, will be followed by 84, 94 and 104 versions. This is all the product of the partnership with architect Fulvio De Simoni, who has styled every model in the range since the relaunch of the Austin Parker brand in 2008.


Bavaria Yachts Norway

Bavaria MotorbÃ¥t Norge AS is expanding its collaboration with Bavaria Yachts Germany and is now the exclusive importer of sailing boats in Norway. Bavaria MotorbÃ¥t Norge AS has successfully imported motorboats made by Bavaria into Norway for 15 years. The company name has been changed from Bavaria MotorbÃ¥t Norge AS to Bavaria BÃ¥t Norge AS.  The sales and service of Bavaria Yachts sailing yachts and motorboats are now provided from a single source. Lars-Erik Solvang and the Bavaria BÃ¥t Norge AS team now offer the whole product range of the second largest shipyard for series yachts. Lars-Erik Solvang has been associated with the Bavaria Yachts brand for over 15 years. He was initially a office manager for Lunde BÃ¥t AS the former dealer of sailing yachts made by Bavaria, and later founded his company Bavaria MotorbÃ¥t Norge AS and became an importer of cruisers made by Bavaria.  At the company’s headquarters in the Leangbukta Maritime Centre near Oslo, sailing yachts and motorboats can be viewed in the 800 sqm Bavaria BÃ¥t Norge AS exhibition hall. In Stavenger, customers are supported by the Flow Marine AS team. Indeed, service relating to Bavaria vessels is offered to customers at both sites.


Couach Heralds a New Era

Heralding the start of a new era for oldest French yacht builder Chantier Naval Couach, the company has announced a number of dynamic changes to its team, as well as a new range of yacht designs to represent a more contemporary look for the company. Couach is also working on a collaborative project with a world famous yacht designer, to be announced in the coming weeks. The new wave of talent joining Couach includes a CEO, Deputy General Manager, and Marketing and Communications Assistant. While respecting the original philosophy of bringing excellence to its clients instilled in Couach’s DNA, the appointments are expected to signal a new momentum in its commercial and creative development.Walter Ceglia takes up the post as CEO of Chantier Naval Couach, to drive the company’s new growth. A Harvard Business School alumnus who speaks six languages, Ceglia brings two decades of experience in the energy, automotive and electronics industries across four continents to Couach. A dynamic and motivating leader, he is expected to bring a new tempo to the yard’s activities, while continuing to work with his predecessor to continue the strengths for which the company is best known.  Walter is joined by new Deputy General Manager Michel Prezioso, who will also be managing the marketing and sales activities for Couach. An expert in luxury markets, Michel Prezioso combines this commercial experience with his career in the maritime services industry to perfectly suit his new role.  Regarding the attraction to his new role, Michel commented: “I joined Couach because I’m passionate about boats and navigation. I have known the Couach brand for many years and I firmly believe that the opportunities and potential for development will deliver incredible success to the shipyard. We are writing a new page in the history of Couach, and I am motivated to contribute to this.”  Michel’s commercial endeavours will be supported by new Marketing and Communications Assistant Camille Pinel. Having grown up in a maritime environment of sailors, shipbuilding engineers and yacht brokers, Pinel spent over a decade in Saudi Arabia and realized a part of her studies in the Moscow State University. She is well placed to lead Couach’s marketing efforts, and to explore the potential in emerging markets.  Guillaume Peuchant, recently appointed Vice-President Defense, is managing PLASCOA department defense and professional boats since now 5 years. Former Naval Architect and working in the maritime activity for 20 years. Guillaume travels all over the world to introduce Couach Plascoa experience in governmental administrations such as Coast Guards, Customs and Navies. “Couach is a company where everything becomes possible thanks to fully integrated shipyard with in-house naval architects, design office and R&D departments. Sky is the limit!” commented Guillaume.  From 1st September 2016, Virginie Piccolo becomes part of the new Commercial Department. She will be responsible for the Business Development and the Marketing of the Brand. With more than 15 years of experience in the world of luxury and based in the French Riviera, she will strenghten the shipyard’s image and she will also promote the renovation of the Couach brand.


Evo Yachts More Glamours

After the Cannes Yachting Festival, Evo 43 doubles up for its return to the French Riviera.  One of these famous Italian day cruisers was moored in the gulf of Saint-Tropez as “guest of honour” at the traditional Les Voiles regatta event, while another could be admired in the port of Monte Carlo: two of the most glamorous locations on the French Riviera and the perfect backdrops for a jewel of design and technology like the Evo 43. After the success of last year’s initiative, Rossinavi shipyard confirmed the role of Evo 43 as official 2016 Monaco Yacht Show tender, and from September 28 to October 1, the innovative motor yacht built by Evo Yachts carried some of the Viareggio-based shipyard’s top clients to Monte Carlo.  In the same period, but 80 nautical miles away, a second Evo 43 (with a white hull) made its way to another gorgeous location on the French Riviera: Saint-Tropez and the storied “Les Voiles de Saint Tropez” regatta. At this week-long event, held from September 24 to October 2, the world’s most beautiful classical and modern sailing yachts challenged each other in the spectacular regattas organised in the waters of the gulf. Throughout the event, the Evo 43 was moored nearby for visits on board, sea trials and a unique view of the regattas.  This isn’t the first time Evo Yachts has been a special guest at a world-class event, because the innovation, high-tech content and unique design bestowed on the Evo 43 give the boat an entirely out of the ordinary appeal that never fails to turn heads wherever it goes.


Horizon Marina Becomes Acredited by Gold Anchor Global System

Horizon City Marina, built by Horizon Group as the first private luxury yacht marina in Taiwan, was recently accredited by the Marina Industries Association within the Gold Anchor Global Marina Accreditation system, earning four Gold Anchor certifications for the marina’s customer service, value, and compliance with industry standards. MIA celebrated Horizon City Marina’s contributions to Taiwan’s yachting industry in a special certification event on Sept 20th witnessed by the Kaohsiung city government and attended by MIA President Mr. Andrew Chapman, who traveled from Australia to Kaohsiung for the event.  The Gold Anchor Global Marina Accreditation system was founded in 2013 by the and the Yacht Harbour Association, which both offered their own versions of the Gold Anchor schemes but teamed together to form this single global accreditation system. According to the organizations website, the Gold Anchor Global Marina Accreditation, “provides a template for customer friendly marina development. The Scheme also assists marinas to more effectively position and differentiate themselves in the market place.”  Similar to the hotel star rating certifications, the Gold Anchor Marina Accreditation system can issue a total of five gold anchors, based on the highest rating in a variety of categories, measurable items include ambiance; planning, policies and procedures; customer service; environmental; on water facilities and infrastructure; and on shore facilities and infrastructure. Areas such as software planning, educational training, environmental protection measures, and the surrounding environment are taken into consideration within these categories. To evaluate the marina, mystery visitors will make unscheduled visits as well as assess customer satisfaction.  As Taiwan’s only internationally classed marina, Horizon City Marina provides berths for 33 feet (10M) to 197 feet (60M) yachts at its central location in downtown Kaohsiung; logistics, repair and maintenance, provisioning, trip planning/tourism, and other professional marina services are offered for our visiting yacht owners.


Invictus Appoints New Dealers

Following the successful debut achieved during the latest edition of the Boot Dusseldorf 2016, to find a dealer for the German market as well as for the key countries of northern Europe become one of the main priorities for the young Italian shipyard. “Invictus is a brand with typological features particularly suited for sailing in lakes – states Christian Grande designer for Invictus Yacht - for this reason we firmly believe that our products will easily find a good position in these countries’ markets. Countries marked by a stable economy leading to better results in terms of sales if compared to other European countries where the crisis is still having a negative impact on the actual sales and on the overall market trend even now.”  “Dealers’ selection has been difficult and well balanced – stated Grande – After waiting more than one year before deciding to which partner we could reserve the exclusive distribution of our brand Invictus, today we have succeeded in identifying the most appropriate dealers, capable of describing to potential clients our products Invictus in detail. More generally, the dealers we selected are partners with equipped and appropriate facilities, able to provide the proper support to customers also in the after sale activities. This is fundamental for Invictus, which considers the service as important as the product: the owner who choses Invictus becomes a spokesman for the brand and his satisfaction becomes a key factor. For this reason, it’s important for the owner to be supported and helped also after having concluded the purchase.” According with the faster growth of the shipyard, Invictus Yacht is proud to announce that the new dealership agreements are the results of a big effort aim to improve its dealer network, thanks also to the importers help now divided as follow.


Princess Announce Operating Loss for 2015

After one of the most challenging years in its history, Princess Yachts International Plc today reports a loss before taxation of £20.25m on turnover of £201.23m for the year ending 31 December 2015 (2014: £239.63m).  Although disappointing, exceptional factors have played a significant part. The lingering effects of damage to stock, facilities and production scheduling caused by the hurricane-force storms in 2014, coupled with unfavourable sterling exchange rates and high-margin boat models reaching the end of their life-cycle combined to exert unprecedented pressure on PYI's operations throughout 2015.  In the meantime, PYI has strengthened its product line – adding six state-of-the-art models to its range in as many months – and appointed an Executive Chairman, Antony Sheriff.  Previously CEO of McLaren Automotive, and holder of a number of senior roles at Fiat, Mr Sheriff has a strong track record in leading profitable businesses with best-in-class luxury products.  Already, PYI is seeing tangible indications of a return to normative performance in 2016 with positive operating profits over the past three months. Orders are at their highest levels since 2007, with record sales at the Cannes Yacht Show in September, and trading conditions are increasingly favourable, as the company is deriving significant market advantage from the recent realignment of sterling-based exchange rates.  Significantly, Princess has embarked on an ambitious product development strategy and a new product renewal cycle as part of its long-term business plan and the company is now recruiting skilled professionals in key areas to realise its ambitions.  The board forecasts renewed buoyancy across the PYI business in 2016 and 2017. Already, £14m has been injected as the first stage of an ambitious three year £55m investment by PYI which will see further development of the product portfolio, as well as production improvements at the company's manufacturing facilities in Plymouth, which employ more than 2,000 people. 

Princess Announce New Product Development Director

Princess Yachts International has announced the appointment of Paul Mackenzie as Product Development Director. After nearly two decades at McLaren where he was responsible for spearheading the brand's Special Operations division, Paul follows Princess' Executive Chairman, Antony Sheriff, making the move from the renowned super sports car manufacturer to the Plymouth based yacht builder.  During his time at McLaren, Paul created a new business within the company, providing luxury customisation and building limited run vehicles, which became a significant profit centre for the company, while also directing the development and launch of the award-winning McLaren P1.  Having graduated with a BEng (Hons) in Composites Engineering at Plymouth University, Paul will return to the city as he takes up the new position at Princess Yachts. Overseeing the existing design team, Paul's role will see him drive forward the development of the company's product range, helping to maintain its strong position as one of the most respected manufacturers in the industry.  

Princess Embrace Collage of Art Philosophy

At the Cannes Yachting Festival, Princess Yachts revealed the incredible artistic installation created by two recently graduated students as part of an on-going partnership with Plymouth College of Art. Situated in the South West of England, within close proximity of each other, both Princess and the college are highly regarded globally, and both continue to push the boundaries of design and craft. The college, which was established in 1856, is renowned in art circles as one of the most important artistic establishments of all time, with a rich history, outstanding curriculum and a facility admired by professional institutes the world over.  The partnership has evolved as part of Princess Yacht's determination to show the beauty and craft behind every element of yacht manufacturing. After viewing the building facilities, Plymouth College of Art were captivated by the network of hidden wires that breathe life into every Princess Yacht and invited two of their most passionate, recently graduated students to create a piece of art that brought to life this often overlooked, yet fascinating process.  The two artists, Fern Robinson and Hannah Webb, graduated this year from the college. With a BA (Hons) first class degree in Contemporary Craft, Fern was looking primarily at tactile engagement, utilising cables that are ordinarily found in the nervous system of a Princess yacht to power everything from instrumentation on the bridge to generators, engines to air conditioning, lights to latrines, and even audio and visual equipment.  The artwork was revealed at the marine calendar's most prestigious event – Cannes Yachting Festival at the Princess Yachts stand, before it travelled to Southampton Boat Show last month. The creation marks the first stage of the partnership between the two South West organisations that will see Princess become part of the revered college's on-going curriculum. The collaboration is another way Princess is looking to support the local community, helping the area of Plymouth to thrive and grow, building on the brands existing established apprenticeship scheme.  Both Princess' Haslam and the college's Professor Brewerton agree that what most areas of industry needs is out of the box thinking and a live:work behaviour to take hold, as corporate life seems to all too easily lose an important aspect of tactility and personality, both of which are crucial for innovation and progression.


Riviera Largest Rendezvous in Americas

There’s nothing quite like cruising in company to idyllic destinations to remind you why the global Riviera Family of owners are so passionate about the rich and rewarding boating lifestyle.  These are the types of adventures that build the confidence and skills for people to use their yachts to their full potential, that create the very special memories that last a lifetime, and, importantly, are often the beginning of long-lasting friendships.  Indeed, the camaraderie on the Riviera Rendezvous in the San Juan Islands is clearly valued by the marque’s growing family of owners on the West Coast of the United States who, each year, gather together to celebrate Riviera and the very best of the boating life.  The 2016 Riviera Rendezvous was the largest and most fun-filled ever held in the Americas, with beautiful sunny weather, over 150 people and 40 Riviera yachts attending.  Guests came from the Pacific North West, Seattle and Canada to enjoy the events at Roche Harbor and Snug Harbor Resort, hosted by dedicated Riviera and Belize dealers Emerald Pacific Yachts and Van Isle Marina.  Riviera owners and enthusiasts celebrated with a potluck dinner that would make any foodie smile and a pirate-themed day of fun that included a gourmet feast included a pig roast, live music and games with terrific prizes.  Long-serving US Riviera dealer Rob Scott, from Emerald Pacific Yachts, said the high level of participation added to the fun among st a great group of people.  Swashbuckling Seattle Riviera owners Nelson and Kathy Goodsell – attending their 6th Riviera Rendezvous – took out the best-dressed prize with their pirate attire, and also organized prize-winning Riviera Ribs which were deliciously presented on a pirate ship plank for all to enjoy.  Michael Asmussen owner of the 34 Open Flybridge, Runaway said the friendships made throughout the event ensured great company for the entire cruising season.  Riviera’s US-based international sales director Chris McCafferty travelled from Florida for the Rendezvous, while Brand & Communications director Stephen Milne flew in from the Riviera factory in Australia to express the company’s appreciation for their continued loyalty, on behalf of the 500-strong team on Queensland’s Gold Coast.  Represented by an international dealer network spanning the globe, Australia’s largest and most-awarded builder of luxury motor yachts continues to expand its international footprint, with support from the world-class factory on Australia’s Gold Coast.  Riviera has an American headquarters in Stuart, Florida, where a talented team of highly regarded owner care and service staff led by international sales director Chris McCafferty provides support for both dealers and owners in every market outside Australasia.  In Barcelona, Spain, Riviera has recently appointed European sales manager Jan Van Oostenryck to further strengthen its international presence and to further support both existing and prospective owners.  Riviera has an unparalleled commitment to customer care, which includes exclusive invitations to regular Experience trips cruising in company with fellow members of the global family of Riviera and Belize owners and also hosts regular educational and social events.  Each May, the Riviera Festival of Boating is held at the home of Riviera, the 14-hectare, world-class facility on Australia’s Gold Coast. This truly unique festival of fun and learning includes spectacular social events and, in 2016, over 110 free educational seminars and workshops were created to assist owners to harness the full power of knowledge of their yacht, its systems and also handling techniques from docking all the way through to extended offshore passage-making.  International buyers are also offered the opportunity to take delivery of their luxurious Rivieras in Australia, exploring the Queensland and NSW coastlines aboard their new motor yachts and taking in iconic attractions including Sydney Harbour and the Great Barrier Reef.  Mr Longhurst said such consideration for Riviera’s global ‘family of yacht owners’ is creating decades of confident and enjoyable boating.  Riviera calls this: ‘the ultimate boating experience’.

Riviera Festival Awarded Queensland Best Corporate Event

The 2016 Riviera Festival of Boating has been formally acknowledged for excellence as Queensland’s Best Corporate Event. This year’s festival of fun and learning was the largest and most comprehensive ever staged at the home of Riviera on Australia’s Gold Coast, attracting over 1000 registrants from around Australia and the world. In accepting the 2016 Best Corporate Event accolade on behalf of the 500-strong Riviera team, Brand and Communications Director Stephen Milne said the 2016 Festival truly reflected the ethos of excellence that flows through every aspect of Riviera  Australia’s favourite and most-awarded builder of luxury motor yachts.  The 2016 Festival’s hands-on workshops spanned all aspects of boating – from weather forecasting and routine maintenance to offshore seamanship and advanced navigation, and placed a special emphasis on safety. The Friday Ladies Luncheon & Fashion Parade was staged at the iconic Marina Mirage shopping and dining destination in Main Beach, while the spectacular Saturday evening red-carpet marina party, gala dinner and show – Viva Las Riviera – transformed part of the Riviera factory into a magnificent ballroom for almost 600 guests.  Judges of the 2016 Australian Event Awards praised Riviera for its genuine commitment to helping owners realise their full boating potential.  Mr Milne said work has now begun in earnest for the 2017 Festival of Boating from 25-28 May at Riviera’s world-class Coomera facility – the largest of its type in the Southern Hemisphere – and motor yacht enthusiasts can register now to receive the 2017 Festival of Boating event program in advance by visiting the Events section on the Riviera website

Riviera Apprentices Awarded for Excellence

Riviera’s strong commitment to the future of the Australian marine industry continues to be recognised and rewarded through the outstanding achievements of its high-performing apprentices. There are now some 50 apprentices learning their trades and honing their skills at the world-class Riviera facility on Australia’s Gold Coast – a mixture of fulltime, mature-aged and school-based apprentices.  School-based lamination apprentice Dominic Perry feels the deep sense of pride he has in his work stems from the hallmark ‘ethos of excellence’ that applies to everything that Riviera undertakes.  School-based boat-building apprentice Cameron Wilton from Helensvale State High School was awarded the Gold Coast region’s School Based Apprentice of Year.  The School Based Apprenticeship and Traineeship Awards recognise and celebrate the outstanding achievements by students, staff and schools within the vocational education and training sector who strive for excellence, best-practice and innovation.  Shaun Austin, another Helensvale school-based apprentice boat-builder, was also a deserving finalist in the awards, a fact Riviera Quality, Safety & Training Manager Adam Houlahan says reflects his commitment to excellence on the factory floor, and in his studies.  Also in attendance at the recent awards night were families, schools and training partners celebrating the successes of students. Riviera also partners with Beenleigh State High School, Nerang State High School, Varsity College and Livingstone Christian College for the School Based Apprenticeship Program.


Viking New Jersey Run for the Fallen

In a reflection of remembrance, a team of military runners from across the United States came together to embark on a three day journey of over two hundred miles from the Cape May Lighthouse to the New Jersey Gold Star Family Monument in Holmdel, New Jersey to honor every New Jersey service member who has died in support of Operation Iraqi Freedom, Enduring Freedom, Operation New Dawn, and all those who have fallen under the American flag.  Each mile is dedicated to a fallen New Jersey Hero and their Gold Star Family. The team stops at each Hero Marker, one every mile, to present a flag and personalized card to waiting family members, friends and comrades. The Viking Yacht Company was honored to again be a part of the New Jersey Run For the Fallen. At mile marker 226, SPC Michael L. Gonzalez was honored at the Viking Yachting Center and John Kasinski and Andy Jackson from the Viking Yacht Company presented the Gonzalez family a check to a scholarship fund in remembrance of Michael as well as a check to New Jersey Run for the Fallen.

Viking Employee Appreciation

Mother Nature couldn't rain on our parade! Despite some stormy weather, the annual Viking Employee Appreciation Clam Bake created miles of smiles last weekend. Family and friends feasted on delectable Jersey clams, fire roasted pork, grilled burgers and hot dogs, then topped it off with sweet treats of cupcakes and clouds of cotton candy. The DJ kept the party going indoors and the kids found plenty to do outdoors while plant and boat tours continued throughout the day. Thanks to the staff volunteers who helped pitch in, and thank you to every Viking employee for making the Viking Yacht Company the #1 boat builder in the world.


Wider Prince Albert II of Monaco Visit

Among the many guests who visited Wider during the recent Monaco Yacht show, the visit of his Serene Highness Prince Albert II of Monaco was of particular significance.  Prince Albert II expressed great appreciation, and considerable insight, for the technology employed on-board the ground-breaking super yacht. However, his visit was not only to see first-hand a yacht that has been so widely publicized and talked about: the Prince, together with the CEO of RINA, Ugo Salerno, bestowed the vessel with the prestigious RINA Platinum Green Plus award.

New Model: Marex 373 Aft Cabin Cruiser

Marex presents the new 373 Aft Cabin Cruiser, a development of its 2009 launched 370 with the changes coming mostly in the window profile.  Indeed the new 373 revisits all windows with the top main deck window from the super structure removed, and large hull side windows added to both the fore and aft cabin areas.  For the remaining the Marex 373 Aft Cabin Cruiser keeps the unique formula of the 370 for an elegant looking hard top sport cruiser, with a unique highly efficient single engine installation. 
Technical Data: 
LOA - 11.3 m (37ft) 
Beam - 3.5 m 
Draft - 1.09 m 
Weight - 6500-7000 kg 
Fuel Capacity - 650 l 
Water Capacity - 300 l 
Max Persons - 10 
Accommodation - 5 berths in 2 cabins 
Engine - 1 x Volvo Penta D6 370hp, D6 435hp 
Propulsion - Seatorque straight shaft with mid positioned engine 
Speed - max 29 knots, cruising 25 knots estimated 
Hull Shape - planning with shaft propulsion 
Project - Marex Seaway, E.Aalrud, JJ Design and E.Thorup
Certification - CE B

October 29, 2016

Consult ~ 28-29 meter Raised Pilot House Super Yacht 2016

INTRO
The new 28 to 29 meter Raised Pilot House Super Yacht was created by Sanlorenzo in 2011, when it replaced the long standing good selling SL88 with the SL94.  Just as the 88, the SL94 was also a raised pilot house yacht, but had an important different layout which the previous model did not offer, for a main deck with fore ship owners stateroom.  The SL94 had also the advantage which similar type and size yachts above 28 meter did not have in 2011, and that was a hull size or load line length 23.9 meters or under.  Meaning it can be helmed by owners or captains with a standard yacht master licence.  This gave the SL94 two features unheard in this size; owners room on the main deck which used to be found in yachts a couple meters bigger, and a hull size which legally classifies as a smaller yacht.      
PRESENT
The Sanlorenzo SL94 was an important change and other builders reacted to this.  In the fall of 2012 Ferretti presented the project for the 960, a new flagship for the Yachts range launching in the first half of 2013.  Amer came following in 2013 with the semi wide body Cento measuring just above 29 meters.  Always in high attention Azimut followed with the new Grande 95RPH which launched in early 2014.  Seeing all this competition in 2014 Sanlorenzo tweaked its SL94, and developed it into the SL96 with some important modernization details, see large sized cabin windows below, and opening optional balconies on the main deck.  The last to join the pack is the British Sunseeker who in 2015 presented the project for its new raised pilot house 95 Yacht which the Poole based builder launched in the second quarter of 2016.
Upcoming is the Summer 2016 presented project by Canados with the 969 Coliseum, set to launch in 2017.  The Canados will be an interesting challenge to all builders listed here, with Sanlorenzo being the traditional competitor, as both builders are a representation of hand build made in Italy semi-custom yachts since the 1970's.  
FUTURE
It is a growing new class with some important super yacht builders creating an interesting choice to buyers looking for a raised pilot house pocket super yacht of 28 to 29 meters overall with a hull or load line length less to 23.9 meters and an owners stateroom on the main deck.  Who is next in this class is all speculative, but expect something to come from Montecarlo Yachts, Princess, and Fipa Maiora.  I would say the next new challenge in this size coming from Montecarlo Yachts who would not surprise me to have something ready for 2017 as the company has an empty spot between its large 105 and 86 models.
The Yachts
Specifications, speed and range data as supplied by boat builders. 
Prices are at factory, no Taxes or VAT, standard engines and equipment, dated 10/2016.   
Ferretti 960
LOA - 29.2 m (95.9ft)
Hull Length - 23.9 m
Waterline Length - 22.3 m
Beam - 6.7 m
Draft - 2.2 m
Displacement - 87 t unloaded, 99 t loaded
Fuel Capacity - 9000 l
Water Capacity - 1320 l
Accommodation - ten guest berths in five cabins, five crew berths in three cabins
Max Persons - 20
Engines - 2 x MTU 16V2000 M84 2218hp, 16v2000 M93 2435hp, 15v2000 M94 2638hp
Propulsion - line shaft with V-drive
Speed - 27 knots max 24 cruise with MTU 2218hp, 31 knots max 27 cruise with MTU 2638hp
Range - 315 nm at 23 knots cruise with MTU 2218hp
Hull Shape - planning warped Vee with 12 degrees deadrise aft
Project - Zuccon International Project line and interior, Ferretti Group Engineering hull
Certification - modules B + F + Aa (Sound Emission) RINA
Price from 7,000,000 EUROS with standard MTU 2218hp
Positives = low profile, side saloon door, stern chaise lounge 
Negatives = no foredeck dinette, no real layout choices
Amer 100 Cento
LOA - 29.6 m (97.1ft)
Hull Length - 23.9 m
Beam - 7 m
Draft - 2 m including props
Displacement - 85 t half load
Fuel Capacity - 11500 l or 10000 l
Water Capacity - 2000 l
Accommodation - ten guest berths in five cabins,, four or six crew in four cabins
Engines - 4 x Volvo D13 800hp, D13 900hp, 2 x Cat C18 Acert 1015hp, C32 Acert 1925hp, MTU 8V2000 M94 1085hp, 12V2000 M94 1920hp
Propulsion - line shaft with ZF greabox, Fortjes pod drives, or quadruple Volvo IPS forward looking dual propeller pod drives
Speed - 20 knots max 17 knots cruise with MTU 1085hp, 28 knots max 24 knots cruise with Cats 1925hp and Fortjes pods, or 4 x Volvo D13 800hp and IPS pod drives
Range - 584 nm at 24 knots with quad Volvo 800hp IPS pods version
Hull Shape - planning Vee with 12 degrees deadrise aft
Project - Massimo Verme
Price from 8.600.000 EUROS with Cats 1925hp
Positives = foredeck pool, port starboard saloon doors, wide owners stateroom, propulsion choices
Negatives = semi-widebody for stern to mooring,  
Azimut Grande 95RPH
LOA - 28.62 m (93.9ft)
Hull Length - 23.9 m
Waterline Length - 23.3 m
Beam - 6.94 m
Draft - 2.05 m full load
Displacement - 111 t full load
Fuel Capacity - 12000 l
Water Capacity - 2000 l
Accommodation - ten guests in five cabins, four crew in three cabins
Engines - 2 x MTU 16V2000 M94 2200hp
Propulsion - line shaft
Speed - 28 knots max, 22 knots
Range - 350 nm at cruise
Hull Shape - planning Vee with 7.6 degrees dead-rise aft
Project - Stefano Righini exterior, Studio Salvagni interior design concepts, Pierluigi Ausunio naval architecture
Certification - UNI ISO8666 for data
Price from 7.250.000 EUROS with MTU 2200hp
Positives = main deck owners stateroom views, largest flybridge
Negatives = second smallest saloon in size
Sanlorenzo SL96
LOA - 29.1 m (95.4ft)
Hull Length - 23.9 m
Beam - 6.75 m
Draft - 1.93 m full load
Displacement - 98 t unloaded, 105 t loaded
Fuel Capacity - 8150 l
Water Capacity - 1900 l
Accommodation - eight guest berths in four cabins, or ten guest berths in five cabins, four crew in two cabins
Engines - 2 x MTU 12V2000 M94 1947hp, 16V2000 M84 2216hp
Propulsion - line shaft
Speed - 29 knots max 26 knots cruise with MTU 2216hp, 25 knots with MTU 1947hp
Range - 418 nm at 26 knots with MTU 2216hp
Hull Shape - planning Vee with 16 degrees deadrise aft
Project - Franceso Paszkowski
Certification - CE A
Price from 7.500.000 EUROS with standard MTU 1947hp
Positives = layout options, tender garage and up down bathing platform, timeless lines
Negatives = none
Sunseeker 95 Yacht
LOA - 28.06 m (92.1ft)
Hull Length - 23.9 m
Beam - 6.55 m
Draft - 2.13 m
Displacement - 84700 kg half load
Fuel Capacity - 12000 l
Water Capacity - 1750 l
Accommodation - ten guests in five cabins, four crew in two cabins
Engines - 2 x MTU 12V2000 M96L 1950hp
Propulsion - line shaft in tunnels for propellers
Speed - 28 knots max, 24 knots cruise, 12 knots economic slow long range
Range - 487 nm at cruise, 1490 nm at 12 knots
Hull Shape - planning Vee with 17.5 degrees deadrise aft
Construction - hand laid fiberglass, Vinylester resin skin coat and powder pound mat, balsa cored hull sides, PVC cored super structure
Price from £UK 5,995,000 with MTU 1950hp
Positives = smallest in size, jacuzzi on flybridge, large master stateroom 
Negatives = no tender garage
Canados 969 Coliseum *project
LOA - 29.5 m (96.5ft)
Length - 28.3 m
Hull Length - 23.9 m
Beam - 6.62 m
Draft - 2.1 m
Displacement - 80 t dry , 95 t loaded
Fuel Capacity - 9750 l
Water Capacity - 1500 l
Accommodaiton - ten berths in five cabins, or eight berths in four cabins, 3/4 crew in two cabins
Engines - 2 x Cats C Acert C32 1925hp, Man 1900hp, or MTU 16V2000 M94L 2600hp
Propulsion - line shaft with ZF gearboxes
Speed - 28 knots max, 23 knots cruise, 16 knots low planning speed with Cats 1925hp
Range - 420 nm at cruise, 650 nm at low planning speed with Cats 1925hp
Hull Shape - planning Vee with optional active stabilizers
Project - Marco Casali
Certificaion - UNI ISO8666 for data
Price from 7,400,000 EUROS with standard 1925hp
Positives = three PWC aft garage, fore deck jacuzzi pool, large owners stateroom
Negatives = still a project, too fancy double C-shaped dinette aft deck layout

October 28, 2016

Project: Codecasa 65 meters

Codecasa has launched four 65 meters super yacht all very different to the other.  Now the renowned fully custom super yacht builder presents a project for another distinctively classic new Codecasa 65 meters project designed in-house by the Viareggio shipyard. Since always a symbol of high quality products and refined nnot excessive aesthetic taste, the Codecasa brand reflects in all its production a style, which goes against the current trend of showing off at all costs some stylistic extravagances. It is a choice of simple elegance, appreciated by many people.  Today we reveal this new project of 65 meters, where the choice of the shiny metallic grey color for both the hull and the superstructure adds charm to the streamlined and simple lines of this super yacht.  The Codecasa 65 is distributed over four decks and it features large windows which brighten up the interiors. From a functional point of view, great attention was devoted to the exteriors with comfortable and spacious relaxation areas on all decks, in addition to a large swimming pool in the forward zone.  CodecasaYachts are always featured by an iconic exterior design combined with fully customizable interiors. This is what makes each Codecasa Yacht unique.  

New Model: Formula 330 Crossover Bowrider

Formula expands its Crossover Bowrider range with the introduction of the 330 model sitting alongside the well received 350.  Formula Crossover Bowrider range is aimed at the day boat user, with the bonus of an overnight twin berth cabin below deck.  The Formula 330 Crossover Bowrider continues the North American builder fame of building fast boats, with twin Mercruiser 380hp allowing top speeds up to 46 knots.
Technical Data:
LOA - 10.54 m (34.7ft)
Hull Length - 10 m
Beam - 3.12 m
Draft - 0.89 m
Displacement - 5556 kg
Fuel Capacity - 571 l
Water Capacity - 94 l
Accommodation - two berths 
Engines - 2 x Mercruiser 8.2 ECT 380hp
Propulsion - Mercruiser Bravo 3 dual prop stern drives
Speed - 46 knots max, 36 knots cruise, 25 knots economic cruise
Hull Shape - Planning Vee with 21 degrees deadrise  
Certification - NMMA

October 27, 2016

Project: Absolute 73 Navetta

Absolute looks towards 2017 with an expansion plan and the launch of a couple new models. of which will be the project of the 73 Navetta.  A new Absolute flagship surpassing the currently largest 72 Fly by one foot, and third model of the Navetta explorer yacht range the 73 presents itself as a spacious offer in its size and beyond.  With a length of about 22 meters Absolute is saying the new 73 Navetta will offer spaces similar to yachts a couple meters longer.  For example even on rendering the flybridge of the 73 Navetta looks already abundantly spacious. The 73 Navetta is to be powered by twin Volvo 900hp engines and continues Absolute use of the IPS pod propulsion system.   

October 26, 2016

New Model: Back Cove 32

Always renovating its down East lobster cruisers, Back Cove launches the new 32 a model which currently stands in between the 30 and 34 models.  The Back Cove 32 continues the single engine philosophy of the Rockland Maine USA builder.  Accommodation offers a double owners cabin forward, separate shower and toilet room below, with galley and dinette on the main deck.  Power is a single Volvo 370hp with line shaft propulsion.
Technical Data:
LOA - 11.28 m (37ft)
Hull Length - 9.98 m
Beam - 3.61 m
Draft - 0.91 m incl prop
Displacement - 6.8 t light
Fuel Capacity - 700 l
Water Capacity - 302 l
Accommodation - 2 + 2 berths
Engine - Volvo D6 370hp
Propulsion - line shaft with four blade propeller
Construction - PVC foam core infused resin build, Vinilester exterior resin

Improve-it = Blue Ice 38 V

Blue Ice a brand of Sea Engineering group has released an improved version of the 38 V.  The 38 V represents one of the most successful models from Blue Ice: and the improved version, even if it maintains the basic features, introduces changes making life on board more comfortable, providing at the same time a touch of elegance to the exterior lines.  The Blue Ice 38 V has improved in various area, the most visible exterior change is the introduction of new port holes, which now have a vertical shape.  Space inside has has also been improved with increased headroom in the shower head compartment.  But the most important change for the improved Blue Ice 38 V will come to the cockpit deck, which is now on one level, and also features a dinette transformation for the aft sun-pad.

New Model: Viking 48 Open

The Viking 48 platform continues to expand and here the New Jersey USA builder launches the Open, second version of the series which is to be followed by the SC and ST models.  Most sporty of the Viking 48's the Open presents itself with large exterior areas offering a central helm, two companion way settee, and two J-shaped dinettes. The exterior cockpit is usually covered by a rigid hard top. The aft deck is a free space sport fishing tournament area, with double mezzanine settees. Below is accommodation for four with an owners room forward, twin bunk cabin to starboard, galley, saloon, and shower head.  Engine options come from Man 900hp and go to optional 1200hp units.
Technical Data:
LOA - 15 m (49.1ft)
Beam - 5.2 m
Draft - 1.39 m incl props
Displacement - 28982 kg loaded
Fuel Capacity - 4504 l
Water Capacity - 674 l
Accommodation - 4 berths in two cabins
Engines - 2 x Man V8 crm 900hp, 1000hp, 1200hp
Propulsion - line shaft in tunnels
Speed - 35 knots max, 30 knots cruise

October 25, 2016

Project: Tiara 44 Flybridge

Tiara presents the project for the 44 Flybridge, a new model which will share hull the with Coupe and Q44 models.  The 44 Flybridge will also have a revisited main deck when compared with Coupe with the standard layout offered without an interior helm station.  Access to the flybridge is from a staircase type ladder to port side on the aft deck.  The bridge is covered by an open type rigid hard top, and will have a U-shaped dinette, wet bar, L-shaped settee, and helm station to starboard.  Power choices are not yet advised but expect the Tiara 44 Flybridge to be powered as the Coupe with Volvo's 435hp with IPS pod drive, or Cummins 550hp and ZF Zeus pod drives.  

October 24, 2016

New Model: Jeanneau 46 Leader

Launched at the end of 2015 Jeanneau 46 Leader, flagship model of the sport cruiser range impresses for her sinuous profile. You can say that Italian design Garroni out did himself in the sweet lines of the Jeanneau Leader 46.  But the Leader 46 does not stop impressing with its exterior profile and goes even further by offering luxurious spaces and quality finish inside.  The main deck entirely on one level, offers a large U-shaped saloon to port side, a modular bench seat at the helm that converts into a sheltered sundeck, and a very attractive cockpit galley. Below the sleep accommodation of the  Leader 46 offers a choice of two or three double cabins layout, including a full beam midships owner’s suite.  Main guest cabin is located to forward and features a shared private head.  A third bunk guest cabin is available as option to port side, and replaces an L-shaped dinette.  Power starts with standard Volvo 370hp and stern drive propulsion, and goes up to 400hp units with stern drive or 435hp with IPS pod drives.  
Technical Data:
LOA - 14.3 m (46.9ft)
Hull Length - 12.6 m
Beam - 4.1 m
Draft - 1,1 m
Displacement - 10,600 kg light
Fuel Capacity - 900 l
Water Capacity - 400 l
Max Persons - 12
Accommodation - 4 + 2 berths, or 6 berths in three cabins
Engines - 2 x Volvo D6 370hp, D6 400hp, D6 435hp
Propulsion - Volvo DP duoprop stern drive, or IPS600 forward looking dual propeller pod drives
Project- Garroni, Jand J
Certification - CE B-12, C-14