Project: Sirena 56

Sirena presents the project for a second model for its anticipated explorer yacht range, the 56 that  following the good example of its bigger sister, will be more powerful than its direct competitors and equipped with updated engines to guarantee power, safety and excellent performances. The Sirena 56 will feature spacious external areas to fully enjoy the natural environment and bigger internal spaces both regarding the cabins and the saloon. Sirena 56 is expected to lauch in early 2017 with a World presentation for the 2017 Miami boat show.

www.sirenayachts.com

New Model: Med Yacht 48

Med Yacht is a young builder from South of France founded 2009, and producing its first model the full open sport cruiser 48 in 2011.  Med Yacht are produced by Galeon form Poland and so far the 48 has been its only model altough plans for bigger and smaller models are on the drawing board.  After selling ten plus 48 for 2016 Med Yacht updates the model for what is called the second Edition CJV series.  The new Med Yacht 48 2016 edition is 45 cm wider and 60 cm longer, and recieves the following updates; winshield with a squarish look, new hard-top design, updated deck with tender garage with over two meter of space, and last but not least a more comfortable interior with two cabins two heads layout.  

Technical Data:

LOA - 14.99 m (49.1ft)

Beam - 4.53 m

Draft - 1.1 m

Fuel Capacity - 1900 l

Water Capacity - 400 l

Max Persons - 12

Accommodation - 4 berths in 2 cabins

Engines - 2 x Volvo D6 435hp, D8 600hp, D11 725hp

Propulsion - Volvo forward looking IPS pod drives

Project - Gilles Vaton

Certificaion - CE

www.med-yacht.com

Project: Rio 58 GTS

Rio presents the project for a new 58 GTS, a further development of the well received 54 and 56 Colorado models. The 58 GTS will have important notable differences to the 56 Colorado, and while the exterior is almost identical when looking from distance the top deck has recieved a subtle important redesign and is now higher and deeper.  This has been done in order to offer a fore deck lounge with a U-shape settee looking forward.  In the 58 GTS the stern area is also redesigned now having a larger settee and only one transom entrance to starboard.  From the intial renderings as shown on Rio Facebook page the 58 GTS should also offer space for a garage.  Other important notable differences will be the fuel capacity of three thousand liters, an extra of 750 liters on the 56.  Rio is labelling the 58 GTS as a custom product and hull one has started construction with a completion slated for middle 2017.

www.rioyachts.net

New Model: Canados Oceanic 76 GT

What an important year 2016 has turned out to be for Canados! Not only did Cantieri Navali di Ostia reopen its doors, the Italian yacht builder did a relaunch how it should be done and was one of the most active names of 2016 presenting an important line up of projects and making clients enthusiastic about its future. Props go to Michel Karsenti and his team at Canados. The Oceanic 76 GT was one of the first projects to be promoted in the new Canados.  Interestingly a sale immediatly came through and as promised on the brochure in six months the Oceanic 76 GT was in the water.  The Oceanic made by Canados explorer yacht line has been received with  a positive success, thanks to its work boat inspired design giving extra exterior space, and the unique displanning hull which reduces the hump at the planning speed of sixteen knots.  None the less the Canados Oceanic 76 GT can be ordered with a range of engines from standard Cats 1150hp up twin Man 1550hp, with this last optional choice reaching max speeds of 32 knots.  The Summer 2016 launched hull one was fitted with the standard Cats 1150hp.

Technical Data:

LOA - 23.7 m (77.7ft)

Hull Length - 23.5 m

Beam - 5.8 m

Draft - 1.98 m incl props

Displacement - 56 t full load, 49 t half load

Fuel Capacity - 4800 l

Water Capacity - 1200 l

Accommodation - eights in four cabins, or six berths in three cabins, two crew beths

Engines - 2 x Cats C18 Acert 1150hp, C32 Acert 1450hp, Man V12 1550hp

Propulsion - direct line shaft

Speed - 32 knots max 27 knots cruise Man 1550hp, 24 knots max 20 knots cruise Cats 1150hp, planning speed 16 knots

Range - 360 nm at fast cruise

Hull Shape - displanning

Project - Canados Design Office exterior, Christian Gatto exterior

www.canados.com

Renato Sonny Levi 1926 - 2016

Certainly one of the pioneering boat designers ever to exist Renato "Sonny" Levi has died on Saturday 12 November 2016 at his home in the Isle of Wight.  Born in 1926 in Karachi, India, it is hard to find the right way to describe Renato Sonny Levi: designer, brilliant mind, certainly the father of modern fast boats. During the course of his long and prolific career, he has developed a wide range of innovations for the world of nautical engineering and naval architecture.  Among the most important are his planning deep Vee hulls, the "Delta" variable Vee hulls, surface drive propulsion, and tunnel for the propellers.  From the point of view of design, his boats are recognised as a functional elegance, innovation and sophistication. Levi is in this sense a figure able to manage the project as a whole, from its engineering aspects to the stylistic and aesthetic.  After more than sixty years since his early work, his contribution is a reference point from which all the boating industry continually draws inspiration for innovation and design. Important is also the publication of his two books; Dhows To Deltas and Milestones In My Design, and through numerous articles that have appeared in the most important industry publications.  The University of Genoa had recently awarded Renato Sonny Levi the Honorary Degree in Yacht Design Class LM34.  His known works are still as at today considered as a reference points in nautical design for comfort and rough sea conditions handling at high speeds. Among his production boats is the Italcraft where he developed a lot of his most extreme innovations in production and semi-production as the Drago series, Riva and the 2000 model which is possibly the most innovative model every made by the Sarnico boat builder where he developed the propulsion, the Alfamarine 40 Bronte what is a co-development with his friend Franco Harrauer, and a lot of the models for the boat builders of Fiumicino in Rome; Delta, and Canav.  His latest work is the Levi Boat 30'6 Corsair Classic, for the newly founded company of his son Martin Levi and Antonello Villa.  Obviously there is a long list of competing winning boats in Renato Levi's career and also some special custom projects for special clients as the Count of Agusta, Giovanni Agnelli, Roberto Olivetti, and last but not least the Virgin Atlantic Challenger for Richard Branson. 

Marquis New Web Site

Marquis presents its new virtual World wide web showroom. Marquis was founded in 2005, as the luxury high end production line of the Genmar Group. Located in Pulaski in the USA, the company has since its early start collaborated with renowned yacht designers Nuvolari Lenard, who started up with what is considered Marquis most successful model the 420 SC. The Venice, Italian design team has since then made eight models for Marquis. Marquis current line up offers four models which start with the 500 Sport Yacht and go up to the 720 Tri-Deck. Marquis new web site takes your around with the following buttons; Yachts, Dealers, Construction, Owners, Contact Us, Company, News, Apparel, and Brochure. Marquis is also on social media with a link to its Facebook and Youtube pages located at the top of the page. 

www.marquisyachts.com

New Model: Numarine 105 Hardtop

Numarine is looking at important growth in recent couple years with 2016 being an important establishing year for the Turkish boat builder. For 2016 Numarine launched the 105 Hardtop, a 2013 project which is seeing the construction of a second unit as we speak.  Currently the largest Numarine launched the 105 Hardtop surprises for its vanguard different looks outside, and an interior with a very large midships owners stateroom, two VIP suites, and a guest cabin with double french beds forward.  The crew lobby is located to midships and will also feature three double cabins a lobby and the galley.  The Numarine is standard powered by twin Cats 1825hp giving 31 knots top speed.

Technical Data:

LOA - 32.94 m (108ft)

Hull Length - 30 m

Beam - 7.1 m 

Draft - 1.95 incl props

Displacement - 74 t light, 98 t loaded

Fuel Capacity - 12700 l

Water Capacity - 2400 l

Accommodation - 8 guest berths in 3 cabins, 6 crew in 3 cabins

Engines - 2 x Cat C32 1825hp, MTU 16V2000 M93 2400hp

Propulsion - line shaft with ZF gearbox

Speed - 31 knots max, 26 knots cruise with standard Cats 1825hp

Range - 500 nm at best cruise

Construction - vacuum infusion Vinilester resin PVC foam core, multi-axial unidirectional E-glass

www.numarine.com

Project: Couach 3800

It's big news at Couach who after some years in difficult waters now is back in full swing.  Now after the announced sale and currently in construction new 23 meter the French yacht and super yacht builder has released first details of a new concept from in-house designers Clément Carbonne and Diane Viboud, what is part of a fully revised product line. The inspiring new concepts is for an adventurous new 3800 model, a 38 meters super yacht explorer with a semi-displacement hull.  The Couach 3800 is also the largest super yacht design to come from the company’s own drafting table.  Couach choose to propose this super yacht with a semi displacement hull because boats are above all made for those who require made-to-measure services, absolute comfort and love navigation. 

www.couach.com

New Model: Sea Ray 460 Sundancer

Sea Ray continue its wind of change as started in 2013 with the launch of the 510 Fly model.  Three years later the renovation to its upper sizes continues and this time around it is for a new 460 Sundancer, a project which was presented to the dealers as 450 during the Summer 2016 period.  With the new Sea Ray 460 Sundancer the famed USA boat builder takes customer choice to a new level with important options to the customer from five hull colors, interior layouts for two or three cabins, line shaft V-drive or ZF Zeus pod drives, and optional larger fuel capacity for an extra two hundred liters.  Putting all this togather the Sea Ray 460 Sundancer can really become a tailor made sport cruiser.  Design wise the Sea Ray 460 Sundancer is very much in many areas of its design European inspired, from the large hi-low lift bathing platform, to the astern galley, living located on the main deck, and last but not least a cabin area all located on the lower deck.   

Technical Data:

LOA - 14.22 m (46.8ft)

Beam - 4.32 m

Draft - 1.4 m

Displacement - 14,966 kg with line shafts, 16424 kg with ZF Zeus drives

Fuel Capacity - 1419 l, or optional 1638 l

Water Capacity - 454 l

Accommodation - 4 berths in 2 cabins, 6 berths in 3 cabins

Engines - 2 x Cummins QSB 6.7 550hp

Propulsion - line shaft with V-drive, or ZF Zeus aft looking dual propeller pod drives

Hull Shape - modfied Vee with spray rail and 17 degrees deadrise aft

Certification - ABYC, NMMA, CE

www.searay.com

Project: Rose Island 16.65 m Giano MkII

Rose Island add another project to its Giano series, what the Italian boat builder refers to MkII model.  Contrary to usual belief the Giano MkII, is not a newer version of the 12 Giano but a totally different bigger model measuring over sixteen meters in length.  The Giano MkII is based on Rose Island's 58 Pathfinder hull and will feature the same innovative semi planning with directional central keel bottom.  The design upwards of the main deck, pilot house is completely new.  The hull shape of the Giano MkII has some interesting numbers going on the plane at just eleven knots and reaching max speeds up to 25 knots powered by only twin 450hp engines.  Rose Island is not giving any layout details for the Giano MkII, still I would expect a three double cabins plus crew cabin on the development of the 58 Pathfinder.

www.roseisland.it