New Model: Ferretti 670

2018 marks the fiftieth anniversary for Ferretti yachts and during the celebration for this important event held in Venice and at the end of June it was fitting for the company to present its latest model with a World premiere for the new 670.  The fiftieth anniversary will also mark a change to the Forli based yacht builder with designer duties changing hands from the long standing since 1990 Giovanni Zuccon to the new Filippo Salvetti.  The first model of the Salvetti era takes a lot from the latest smaller sized 550 and 450 models, with an added feeling of stream lined length effect delivered by the sweeping stern design.  The Ferretti 670 will have the usual Ferretti options for a hard top or not flybridge layout, and a three or four cabins lower deck.  Power comes from twin standard Man 1000hp, or optional 1200hp engines.

Technical Data:

LOA - 20.24 m (66.5ft)

Hull Length - 19.29 m

Waterline Length - 17.05 m

Beam - 5.38 m

Draft - 1.60 m

Displacement - 39500 kg unloaded, 47500 kg loaded

Fuel Capacity - 3830 l

Water Capacity - 1000 l

Accommodation six berths in three cabins, or eight berths in four cabins

Max Persons - 18

Engines - 2 x Man V8 1000hp, V8 1200hp

Propulsion - line shaft

Speed - 28 knots max 25 knots cruise with 1000hp, 32 knots max 28 knots cruise with 1200hp
Range - 290 nm at cruise speed

Project - Filippo Salvetti exterior lines, Ferretti Group Engineering interior and naval architecture
Certification - CE A EU directive 2013/53, dimensions ISO 8666

www.ferretti-yachts.com