New Launch: F&S Boatworks 70 Hull 11

This is the first new model review from a US Custom Sportfish yacht builder. While the word custom in Europe is usually associated with 24 metres plus yachts, in the US this goes from sizes around 10 metres and up to whatever you like really, with over a handful of companies offering mostly high performing sportfish boats under the super 80 feet size. Most of these builds are built with the cold molding technique, that is framing in composite wood and then covering all with fiberglass resin. This gives a lighter boat, but also a superior strength construction. F&S Boatworks is one of the over a dozen builders, mostly of which are family run businesses, and its first hull was launched in 1988 what was a 58 feet Sportfish Yacht. This hull no.11 represents its latest, launched in 2008 and is the first enclosed bridge from the Delaware builder and the biggest build too, although hull. no.12 in construction has a say for this being 2 feet longer and a bit wider. F&S Boatworks is also innovative in its hull design offering a convex variable deep hull shape, that is of a deeper-Vee in the center and flatter sections on the side. Not really a new hull shape but not much used! The interior of the 70ft Hull 11 has ten berths four head accommodation, with a galley on the main deck, and features a luxury appointed enclosed bridge with internal stair case. F&S Boatworks also managed a nice Enclosed Bridge design, what is always a hard take for any builder. Power is from the latest ultra light performing twin MTU 2400hp each, which give a 43 knots top speed and a cruising of 38 knots.

Technical Data:

Length - 21.33 m (70ft)

Beam - 5.94 m

Draft - 1.52 m

Weight - 38636 kg

Fuel Capacity - 10599 l

Water Capacity - 1514 l

Accommodation - 10 berths

Engines - 2 x MTU M-93 2400hp

Speed - 43 knots max, 38 knots cruising

www.fsyachts.com