Project: Baglietto Fast50

Baglietto has announced two new projects of fifty meters in a press conference in Milan on eight February celebrating the 170th anniversary of the historical yacht builder. Two new projects of the same fifty meters dimensions  both designed by Baglietto's long standing designer Francesco Paszowksi but with totally different souls. The Fast50, follows the X50 presented a couple of weeks ago here on PowerYacht, what is a high performing yacht representing the core history of the brand, from the seventies till today, and the glorious speed record beating ventures of Pietro of the early twentieth century.  Speed has been part of Baglietto for beyond a century.  The Bagletto Fast50 is a semi-wide body design, and for the first time in the Fast line, it brings a water's edge beach club aft, with an opening stern to aft which expands the dimensions of the area at anchor.  Baglietto is being very tight lipped on the Fast50 performance and layout, but expect speeds of thirty knots which is what the Fast line usually offers.  The first Baglietto Fast50 is set to launch in 2026.

www.baglietto.com

Project: Ferretti InFynito 80

Ferretti expand the InFynito range presenting the second 80 model project of the line up, following the InFynito 90 which in the second half of 2023. Set to debut in the fall of this year the InFynito 80 builds on the range’s typical characteristics: environmental friendliness, unprecedented flexibility and innovative layouts, as magnificently embodied in the iconic All-Season Terrace. Other strengths include the yacht’s versatility, with a sundeck that can be open or semi-closed, and the sheer size, above average for the segment, of the exterior surface area covered and protected by the hard top or superstructure. Built at the recently purchased new Marina di Ravenna shipyard, Ferretti Yachts’ InFynito 80 is the result of collaboration between the Strategic Product Committee chaired by Piero Ferrari and the Ferretti Group Engineering Department, with exterior design by Filippo Salvetti and interiors by design firm Ideaeitalia. InFynito 80 willl have an overall length of over 23 meters, and a maximum beam of six meters plus and is designed to offer lovers of the sea a new and gratifying experience in highly customisable spaces where interiors and exteriors blend into one another. Ferretti's new InFynito 80 also features the Group’s F.S.E.A. technology, a package of environmentally friendly cruising solutions. They include an integrated system that stores the solar energy collected by the photovoltaic panels installed on the hard top in an Energy Bank, which consists of fourteen high-density lithium batteries that deliver more energy at the same time as guaranteeing a favourable weight-power ratio. The battery pack is in the engine room, in watertight steel containers fitted with temperature monitoring sensors. There was also a special focus on the use of green materials, such as natural and bamboo fabrics, regenerated leather and recyclable materials, ecological water-based paints and lamellar teak with FSC 5 certification, used throughout the exteriors. An overview of the various decks highlights the main deck astern, with a generous eighteen square metres dedicated to a beach area that features a sea-view couch incorporating a generous storage unit. There is also a stern platform with a linear lift for launching and hauling up the tender. The nineteen squared meters cockpit has a living area with free-standing furniture for greater flexibility in terms of layout and use. In the 29 squared meters interior saloon, the dining room of the standard version can be replaced by a show kitchen with a bar counter and stools. The yacht’s main galley is at the forward end of the main deck, with an electrically operated sliding glass door providing direct access to the All-Season Terrace. The hallmark of the range is its iconic covered terrace, sheltered by an extension to the superstructure for protection in all weather conditions and total privacy. On INFynito 80, the thirteen squared meters terrace can be configured as a dinette, with seating and an extending table, or as a bar counter. The raised helm station provides excellent visibility and is accessed by a staircase in the centre of the main deck. The upper deck, which is closed on bigger 90 sister, will be a totally open sundeck in the standard version, and a semi-closed one with glass panels as an option on this InFynito 80. The hard top provides shade for the entire dining area and foredeck. The stern section of the upper deck is a sunbathing area with free-standing furniture and an outdoor galley. The 43 squared meters lower deck has a master stateroom at the midships, a VIP suite forward, and two guest cabins. The crew quarters contain two cabins sleeping a total of three people. Ferertti InFynito 80 is to be powered by twin Man 1200hp or optional 1400hp engines for speeds up to 23 knots and a cruise of eighteen, and a range of up to one thousand nautical miles at twelve knots.

www.ferretti-yachts.com

Project: Prestige F5

During the Beneteau Group press conference at the 2024 Dusseldorf boat show, Prestige vice President Erwin Bumps announced the project for an upcoming F5 model.  Very few details have been given apart the above rendering and that the F5 is set to debut during the Cannes 2024 boat show, although expect the model to show up during the Beneteau Group test days in early Summer usually held in around mid July.  Since we have no details I can speculate a bit about the F5, and if this project follows the pattern of the F4 which is based on the Prestige 520, then I would imagine this to be based on the 590 model.  As is the case of the F4, the F5 will benefit from an important re-design and re-engineering of spaces to increase volume as possible, in its sixteen to seventeen meter length.

www.prestige-yachts.com

Project: Hunt Yachts 56

Hunt Yachts present the project for a new 56, a model which replaces and evolves from the 55 Mk.II as presented in 2019.  As its says in the name, designed by the father of the deep-Vee hull, Raymond Hunt and Associates, who founded his boat building firm in 1998.  The Hunt Yachts 56 is offered in two layouts for both main and lower deck with a galley up option for three double cabins, or a galley down with two suites.  The master stateroom in both versions is located at midships, with a third cabin with twin bunks berths located to starboard replacing an L-shaped saloon, with a galley located opposite to port side in the galley down version.  The Hunt Yachts 56 is to be powered by twin Volvo 725hp for top speeds up to 32 knots. 

www.huntyachts.com

Project: Baglietto X50

During a press conference in Milan on eight February, which also celebrated Baglietto 170th anniversary, the today super yacht specialist announced two new projects, with one of these being the X50, an explorer looking super yacht as designed by the Italian builder long standing designer Francesco Paszowski.  The Baglietto X50 is full of stand out features with an open stern which takes a third of the yachts length, and able to carry two ten meter tenders.  The X50 also debuts Baglietto new XO line of tug inspired looks explorer super yachts.  Baglietto has flirted with explorer looking yachts in the present and in the past like the two units of the 42 Exp it launched in 2009, or the recent custom build hull nos#10235, although none of these where tug yacht looking as the X50.  A unique design feature of the X50 will be the disruptive pilot station which features the helm station below and a guest passenger lounge above.  This lounge is designed to be a multi purpose retreat for the owner and his guests, with six screens able to do an array of duties from navigation data to normal TV or computing operation, and can be also fitted out as a private owners office.  The X50 is to be build in ice-class with part of the hull evolving from the T-52 model, but re-engineered to be more sea-worthy with a redesigned bulb shape.  The Baglietto X50 is set to be powered by twin Cat engines for speeds up to sixteen knots.

www.baglietto.com

Project: Domina RS 13.30 m

Domina Yachts from Rome Italy, present the RS project, a thirteen meter fast sport cruiser as designed by Marco Seri, and a tribute from the yard owners to the passion they have for fast boats and yachts.  While for many Domina Yachts is a new name, this is actually the brand as used by Cantieri Navali del Tevere also known with the abbreviated CNT, who was founded in 1964, and entered boat building in 2005 with Mustang Marine and a fast 38 model.  In 2022 the Tiber River boat yard rebranded its new boat building brand as Domina Yachts debuting with the 42 Walkaround.  The RS is the second Domina model and offers a mix of an American muscle power boat and the typical Italian open fast yacht of the Tyrrhenian sea.  For this for example the sun-pad takes the whole beam with no passageway to the sides or in the middle, with a forward facing settee forward, and two bolster seats to port for helm-station, and starboard for co-pilot.  Down below the Domina RS offers sleeping accommodation for four, with an open plan dinette V-berth forward, a separate cabin with double berth to starboard midships, and a shower head to port-side.  The Domina RS can be powered by twin diesel engines with surface drives, and or quadruple Mercury 450 or 500hp petrol gas outboards.  Performance numbers are not communicated but the Domina Yachts should have a sixty knots top speed, considering that she weighs under nine tons unloaded and without engines.

www.dominayachts.com

Project: ISA Yachts Gran Turismo 80M

ISA Yachts, a brand of Palumbo Superyachts, is delighted to announce that the new project Future, ISA Gran Turismo 80 metres, under construction at the Palumbo Superyachts shipyard in Ancona, is taking shape with the steel hull nearing completion. The vessel was sold in July this year and will be delivered in 2027. Team for Design – Enrico Gobbi, who penned the exterior lines, will also be responsible for the interior design. The naval architecture will be completed by Palumbo Superyachts’ in-house team. ISA GT 80 is a sporty coupé with sinuous lines that breaks down the boundaries between indoors and out to create a unique and sophisticated fil rouge. The studied contrast between the hull colour, in steel grey with charcoal details, and the minimal windows confers an even slender appearance to the project and emphasizes its horizontal element. The sky-lounge housing the wheelhouse looks like set back so as not to break the slender line and to emphasize the distinctive ISA arch, here even more dynamic, which connects all the decks. Forward on the main deck, we find the infinity pool connected to the owner cabin via a lit up path with great scenic impact. The owner cabin is a true glasshouse, where the most unobtrusive uprights give centre stage to the opening floor-to-ceiling windows enhancing the sense of continuity between indoors and out. The outdoor furnishing is organic, characterized by round shapes and very modern curves combined with warm wood for a glamorous yet high-quality elegance. The equipped gym is located on the starboard side of the upper deck, which is the bridge where also the wheelhouse and the captain cabin are set. On the main deck, ISA GT 80 features 5 double cabins, including a VIP with lounge. The owner cabin located on the upper deck forward comprises two bathrooms, one with tub and shower, a vanity area, two wardrobes and an office. A sixth VIP cabin with twin beds has been provided on the lower deck. The crew area on the lower deck consists of ten cabins that can accommodate up to eighteen people.

www.isayachts.com

Project: Pardo GT65

Pardo Yachts expand it's GT fleet and present the GT65 project, the third model in this unique looking range. Designed by Nauta with naval architecture by Zuccheri this new GT65 project, preserves the iconicity and elegance that made Pardo Yachts a success from it's debut and beyond that of any forecast, while delivering an unparalleled onboard living experience. Positioned strategically between the GT52, presented in 2022, and the upcoming GT75 flagship set to launch this year, the GT65 serves as the latest addition to Pardo Yachts's versatile series of crossover runabouts. This third model in the GT range perfectly balances spacious interiors and exteriors, flexible layouts and performance, providing an exhilarating yet comfortable cruising experience.  Flexibility comes with two main deck and or lower deck choices, which all revolve if one chooses a galley up or down layout.  In both choices you always get a three double cabins layout, with the standard galley up option give a master stateroom forward with the bed to port side.  In the lower deck galley option the forward cabin becomes smaller and is located to centre, with a C-shaped galley located to starboard in between the three cabins.  The Pardo GT65 is to be powered by twin Volvo 1000hp with IPS pod drives.  

www.pardoyachts.com

Project: Whitehaven Harbour Classic 52

Whitehaven introduces the Harbour Classic 52 project, a timeless down East lobster boat inspired looking classic yacht design. The 52 is to be the largest of the three boat Whitehaven lobster boat looking Harbour Classic line, which start from forty foot showing contemporary luxury, graceful flowing lines, accentuated by subtle wood detailing, and an accommodating interior. Being the largest of the line with an overall length of seventeen meters plus the Harbour Classic 52 is vintage charm meets modern luxury, epitomising sophistication with its sweeping contours and spacious entertaining areas on the main deck, and three double cabins below. The lower deck will offer a master stateroom located to starboard midships, a VIP forward, and third cabin with bunk berths to port side. The main deck prioritises both relaxation and social connection, making it perfect for any escape, with an aft galley to port side, and an L-shaped dinette opposite behind the helm station. Whitehaven Harbour Classic 52 is to be powered by twin Cummins 715hp with line shaft propulsion in semi-tunnels.

www.whitehavenmotoryachts.com

Project: Tecnomar Evo 155

Tecnomar Evo 155 project was born from the need to give continuity to the successful Evo-line, which debuted in 2016 with the 55 model, and was followed in 2018 with the 120 model, of which six units have been build so far.  The Tecnomar Evo 155 will feature exterior with a strong sporty curvy futuristic character, all this in a length of 46 meters and without exceeding a volume of 499 gross tonnage.  A feature in the Evo 155 will be an innovative beach area, with a large stern window, and two foldable doors that allow direct access to the sea and a connection with the external area, allowing 360° liveability between interior and exterior.  The spacious sun deck is equipped with a large bar and a sunbathing area with a swimming pool. A second swimming pool is also found in the extreme bow area on the upper deck connected to a large sunbathing area, convertible into a pleasant dining area with a 180° view of the sea.  The Tecnomar Evo 155 will have interiors characterized by two large lounge areas on the full-beam main deck, with accommodation for ten guests in five suites; two guests on the lower deck, two VIP cabins on the main deck and the Owner’s cabin on the same deck.  

www.tecnomar.com

Project: Sanlorenzo 50Steel

Sanlorenzo present the 50Steel project, a new entry level in its Steel super yacht range which today offers five models and expands up to a 73 meter project currently inbuild and scheduled to launch in 2025.  The 50Steel comes from a design of Zuccon, the designer of all Sanlorenzo yachts since 2018, what will be an innovative super yacht, especially to what regards sustainable technology, but also a new way of seeing space.  For a first the Sanlorenzo 50Steel is to be equipped with a fuel cell technology which generates onboard yacht electricity with both generators and engines switched off. Another new never seen feature in the 50Steel is a new patented design called HER acronym for Hidden Engine Room, which gives extra space to the owner and his guests.  With HER the 50Steel gains unseen space in the lower deck which goes for the Ocean Lounge which offers over 120 square meters just above the water aft.  This Ocean Lounge will feature three unfolding terraces on three sides; aft, port and starboard, and will lead to a gym-spa area which with a split level design that takes guests to the cabin area forward or the living and lounging of the main deck.  The Sanlorenzo 50Steel has a volume of 499 gross tonnage what will feature five guest suites for ten guests, with crew accommodation for nine in five cabins, and three entertainment areas on each floor.  Power for the 50Steel will come from twin Man 1450hp engines for a top speed of sixteen knots.  The first 50Steel is scheduled for a mid 2024 launch and is reportedly being build for Sanlorenzo boss Massimo Perotti.  

www.sanlorenzoyacht.com

Project: Swan Arrow 23.20 m

Swan's motor yacht division was launched in 2021 after a careful study of the market. Leonardo Ferragamo, Chairman of Nautor Group, had been thinking of entering Swan in the power segment for a long time, but he wanted to début with a product able to make a difference, in an already crowded segment.  Ferragamo already entered the motor boating sector with the Camper and Nicholson brand which he bought in 2001 and launched two Ray Hunt designed traditional looking down-East inspired line producing two models a 42 in 2004 and a 50 footer in 2013, with three other projects which went up to a 42 meter super yacht.  The first Swan powerboat was the Shadow which arrived in 2021, followed by the inboard OverShadow 42 in mid 2023. The passion for this adventure, together with the market request have asked for a bigger motorboat leading us to this Swan Arrow project, a 23 meters sport yacht, designed according to the Swan iconic DNA.  Swan Arrow is a sporty and elegant yacht, designed by Jarkko Jamsén, the motor division resident designer, who also penned the two smaller models. With elegant and contemporary design, refined lines and voluminous interior, Swan Arrow is a sport “open” yacht well suited to extended cruising.  To be build in resin infusion with a mix of glass and carbon fibre matrixes the Swan Arrow is a full walk around design, with a fully enclosed hard-top and a spacious walkaround deck plan. The protected cockpit characterized by an opening roof and sliding and pivoting glass door system allows a full panoramic view and an “al fresco” feeling when opened, while remaining cosy, protected and private when closed, perfectly conceived for a yacht designed to enjoy the very best while cruising and at anchor.  Another innovation of the Swan Arrow is the opening platform which becomes a beach area of about fifty squared meters, not floating directly on the water but taken to a higher level thanks to the use of the side openings, altogether creating a real terrace on the sea.  The interior of Swan Arrow displays all the typical details that made Swan yachts iconic, but also introduces new elements and materials.  The space has been maximized offering a “home like” feeling for this 23 meters sport yacht conceived with a two configuration choices of two or three guest cabins.  In the three double cabins layout Arrow accommodates six guests in a captivating space: port side is a dedicated galley, midships full beam master stateroom with a walk-in closet and en-suite; a VIP suite forward, and a twin cabin, both with their own head to create separate and private areas.  The crew quarters for two people is further forward, allowing great privacy for the owners and their guests.  The alternative layout offers two spacious double cabins with a lounge area amidships in between the owners stateroom and forward VIP suite, with a starboard side  saloon with a dedicated dining area and L-shaped sofa taking the spot of the third cabin.  The Swan Arrow is to be powered by standard twin Volvo 1000hp with IPS pod drives for a speed up to thirty knots, with an optional triple set up of the same engine and propulsion which should add an extra ten knots of top speed.

www.nautorswan.com

Project: Tornado 43 WA

Tornado present the project for the 43 WA, a walk-around sport cruiser designed by Michele Frese.  In this size the Italian builders seem have taken the bug for offering walk-around centre console sport cruiser, with Tornado being the most recent to enter this segment. A walk around centre console has the ability to use all fore to aft deck with easy usage, but also having a decent lower deck accommodation sleeping four.  The Tornado 43 WA will offer a deck with a central sun-pad layout which is followed by an L-shaped dinette, and then the helm station located central offset to starboard.  The fore deck will feature a forward V-shaped sun-pad, while another interesting feature will be the drop down bathing platform aft, which goes down in a three steps movement, making it easier and more comfortable to go down in the water.  The Tornado 43 WA will also be flexible for its power and propulsion choices, offered in four options, which start from twin Volvo 440hp on stern drives, and go to twin FPT 550hp on shafts, and then to 600hp with surface drives or same power gas power Mercury outboards.

www.tornadoyachts.it

Project: Alia Yachts 43m raised pilothouse

Alia Yachts in Turkey has started construction of a new 43-metre project with aggressive exterior lines by long-term design partners Omega Architects. In build for a client based in Miami, the design is styled around the relaxed, open-air lifestyle in Florida and the Bahamas. Omega has deliberately kept the profile low-rise and sleek with a menacing pelican-beak bow, helped by the raised pilothouse layout spread over two-and-a-half decks. With ample al fresco areas that include lounging and sunbathing on the aft deck, the foredeck, and the sundeck that also has a hottub, the new design takes the raised pilothouse configuration and stretches it to 42 metres and 380GT. The all-aluminium vessel has a shallow Bahamas draft and a Fast Displacement Hull Form known as FDHF by Van Oossanen, another of Alia’s Dutch design partners. The FDHF outperforms conventional displacement and semi-displacement hull forms at low, cruising and maximum speeds by providing high efficiency throughout the power curve. The interior comprises four guest suites on the lower deck, a master stateroom with walk-in wardrobe on the main deck forward. The lower deck further houses space for 7 crew as well as a very nice sized gym and side-loading tender garage. Sliding glass doors on both sides of the main saloon means there’s always a fresh breeze flowing through the interior. The interior design is by newcomers Yodezeen, a pair of designers from Kyiv with a studio in Miami. Powered by twin MTU 2600hp main engines, the yacht with have a top speed in excess of 22 knots and a range of 3,200 nautical miles at twelve knots. She is scheduled for delivery in summer 2024 and will make her debut at the autumn boat shows.

www.aliayachts.com

Project: Tiara EX 54

Tiara present the project for a new EX 54, its second model of the EX line and what follows in less to two years the debut of the EX 60, the Holland Michigan boat builder current flagship and largest ever build to date.  A fully enclosed sport yacht with conservative looks and entertainment utilitarian amenities, the EX 54 is very similar to the EX 60 in both looks and substance albeit a bit smaller in size, and comes with the same modular aft cockpit selections, although in this new project these are reduced to three against the five of the two meters bigger sister. The EX 54 will feature the same three double cabins layout with two heads, with a full beam midships owners stateroom, a VIP suite forward, and third cabin with bunk berths layout.  The main deck is  reserved for entertainment, with flip down bulkheads serving the lower part of the aft cockpit. The three choices for the aft cockpit revolve the lower part in between the lower and two step upper part with choices involving the aft settee looking forward as standard, which can be ordered as an aft adventure unit, or glass patio with modular settee.  The Tiara EX 54 is to be powered by twin Volvo 725hp with IPS pod drives propulsion.  

www.tiarayachts.com

Project: Boston Boatworks BB44

Boston Boatworks introduces the BB44, the second model in the company’s Offshore Express Cruiser Series. The BB44 unites Doug Zurn’s acclaimed aesthetic refinement with the interior mastery of Winch Design and realizes this collaboration’s full potential through Boston Boatworks’ craftsmanship. The series-priced BB44 blends the efficiencies of Boston Boatworks’ experience in limited production, composite technology, and best methods and materials in manufacturing to produce a boat that rivals custom-built. The BB44 is configured for discerning cruising couples, families and guests who appreciate a safe, comfortable, functional ocean-worthy yacht well-appointed for enjoying day-use activities. The owner’s exclusive stateroom has private entry to a generous head and shower and features a queen-sized bed that slides aft to make servicing and changing linens easy. For kids and adult guests, the salon and pilot house tables lower to become double beds, curtained for privacy and both have independent night-time access to the head.  Alternatively this lower salon can also be ordered as a fully enclosed second stateroom.  Zurn’s hulls are known for their smooth, dry ride even at the BB44’s estimated top speed of 36 knots. Winch Design’s innovative living spaces draw in abundant light and fresh air, yielding an interior that is bright, spacious, functional, and elegant. The standard BB44 is powered by twin Volvo with stern drives. Hulls No. 1 and No. 2 are currently in production, with anticipated launch dates of late summer and October 2024, respectively.

www.bostonboatworks.com

Project: Antonini Seamore 33

Antonini Navi announces the sale for the semi-custom 33 metre Seamore.  A new superyacht chosen by an Italian owner, with a planned launch for early 2025, and then to be presented at the Cannes Yachting Festival in the fall of that year.  Seamore 33 is the first of a semi-custom series built in steel and aluminium.  With this new order, the La Spezia-based shipyard, founded in 2020 by Gruppo Antonini in partnership with Aldo Manna, sets a wider-ranging project in motion that will see Antonini Navi build and market this model, with its original, trendy styling, as a series-produced but highly customisable product.  Gruppo Antonini and Antonini Navi’s know-how in steel and aluminium metalwork will make it possible, starting from the same platform to modify the superstructure and sections of the hull, thanks in part to the intrinsic characteristics of the metal.  The project will be developed by the shipyard’s Technical Office together with Hydro Tec on exterior line design, naval architecture and engineering, while Hot Lab will handle interior designs.  The hull profile features a high, dominant bow that gives the design a sleek and sporty feel, while the volumes of the superstructure contribute to an elegant, maritime look.  The concept involves areas designed to be totally versatile and flexible, giving priority to open spaces that create unique settings for sharing and conviviality among guests. One of the most interesting features of Seamore 33 is the more than 150-square-metre open-air living space on the main deck, much of which can be closed off if needed by sliding pocket windows fitted flush with the deck.  Starting from the stern platform and extending for over 18 metres towards the bow, the unit offers a unique perception of the yacht’s seamless spaces and volumes. This huge outdoor area is joined by a further 160 square metres of al fresco space on the upper deck, of which 50 are shaded by an elegant hard-top.  The interiors stand out for their unique design, featuring a perfect balance between classic elegance and modern innovation, where strong, noble teak wood plays a key role paired with delicate pastel colours that tend towards shades of sage green, creating an atmosphere of calm and harmony with the sea.  These successes consolidate Antonini Navi as a niche brand in the construction of luxury custom super yachts

www.antonininavi.com

Project: Galeon 480 Fly

Galeon continue to renew its thirteen to seventeen meter range, and after debuting the 560 and 440 Fly models in 2023, comes with the project for a new 480 Fly.  The latest Galeon models are recognizable by the endless glazing on the hull sides, and comes as a replacement to the 2016 launched 460 Fly.  Designed as most Galeon's of the last twenty or so years by Tony Castro, the 480 Fly features the Polish builders deck expansion flip over bulk-head tricks, port-side as standard with the starboard being an option, with an astern galley main deck layout, and three double cabins lower deck, with a full beam midships owners stateroom.  The Galeon 480 Fly is powered by twin Volvo 440hp which go up to optional 600hp engines.  It is not understood if IPS will be an option, but the first unit which is under going final construction phase is powered by shaft drives.  The Galeon 480 Fly is scheduled to debut in mid 2024.

www.galeon.pl

Project: Admiral GC Force 73 meters

Back in May 2023 Admiral announced the sale of not one, but three GC Force 70 meters super yachts for a delivery in 2026, 27 and 28 respectively.  A month later the Italian Sea Group announced the laying of the keel of the first of these Admiral GC Force, now renamed and or extended to 73 meters.  Admiral GC Force 73 is designed inhouse by the Italian Sea Group team led by Giovanni Costantino while the interiors are to be made by Francesco Muzio FM Architetura.  Admiral has previously launched two other units in its GC Series the 50 meters in 2016, and a 66 meters in 2019.  Currently Admiral is also building two new flagships; a 98 meter called Project Titanium designed by Winch, and the 88 meter Spyder by Espen Oeino.

www.admiral-yachts.com

Project: Rosetti 40m Explorer

Rosetti presents the project of the 40m Explorer which builds on the astounding triple award winning 38m Explorer platform which has launched two units in 2021 and 23, and the first hull completing two Atlantic crossings in its first year of service. The Rosetti 40m Explorer is a  Sergio Cutolo of Hydro Tec project, based on the two meter smaller sister, recognizable by the new longer sloop stern. As is expected the Rosetti 40m Explorer follows the 38m for super yacht elegant line looks with full explorer qualities for a range of more than 5,000 nautical miles at a speed of ten knots, and considerable fuel and water tank capacities as well as galley and storage. The four decks are flooded with natural light that enters from the large windows, while the large outdoor and indoor spaces are designed to interact with each other and ensure that guests experience both a social and private life.  On the 40m Explorer Rosetti is also offering exclusive décor coming from Luxury Living Group for both loose furniture, fabrics, essences, and metals.  Luxury Living Group has for over forty years designed, produced and distribution luxury furniture for some of the most important international brands as Versace, Dolce&Gabbana, Trussardi, Bentley Motors and Bugatti, in addition to its own brand Luxence Luxury Living.

www.rosettisuperyachts.it