New Model: Benetti Class 132 Classic Supreme

The technical launch of the first Benetti 132 Classic Supreme was held on Friday, May 4th at the shipyard site in sea side town Viareggio, the new location deputed to the construction of the six composite models of the Class line, from 93 to 145 feet.  Following the customary preliminary steps, the yacht was launched into the water, a ceremony witnessed by technical personnel, workers, and all Benetti staff who oversaw outfitting and construction over the past months.  A mark of design continuity today lasting over a couple of decades, follows the new gem of Benetti's Italian style, and springs from a project with exteriors designed by Stefano Righini and interiors by Francois Zuretti who, for this first boat and following the owner’s indications to draw inspiration from a particularly contemporary style, creates a sober, elegant interplay between the oak natural shade, the warm wenge, and diamond pattern leathers and hide.  The outfitting includes the most modern navigation systems developed by the shipyard: from the innovative integrated wheelhouse to the exclusive BEST technology platform; Benetti Exclusive Sea Technology integrating all onboard electronics and systems.  The new 132 Classic Supreme, among the different design solutions, offers also a gym-area on the upper deck, carving out an exclusive space for the Owner and his guests to further relax.  The 132 Classic Supreme is not just a new model to complete the Benetti Class range; it is also the first model built and outfitted in the Lucca Dockyard, the company’s new 4200 meters squared plus facility. Located adjacent to the historic site in Via Coppino, this facility can simultaneously handle production of three megayachts of up to 140 feet, thus effectively doubling the current production capacity and concentrating production of the entire line in Viareggio.  Power for the new Benetti Class 132 Classic Supreme is twin MTU 1450hp which give a 15 knots, 14 cruise, and a 12 knots long range speed delivering a 3500 nautical miles range. 

Technical Data:

LOA - 40.2 m (132ft)

Beam - 8.28 m

Draft - 2.30 m

Displacement - 270 t full load

Fuel Capacity - 42800 l

Water Capacity - 7200 l

Accommodation - 10 guests in 5 cabins, 7 crew in 4 cabins

Engines - 2 x MTU 12V 2000M72 1450hp

Propulsion - line shaft

Speed - 15 knots max, 14 knots cruise, 12 knots economic

Range - 3500 nm at 12 knots

Construction - hand laid fiberglass

Project - Stefano Righini exterior, Francois Zuretti interior

Certification - RINA Class, Hull Mach Y, LY2 Compliance option

www.benettiyachts.it

Project: Carver 36 Mariner

Carver yachts has always been into making these hybrid looking sport bridge cruiser which makes maximum use of beam inside in a wide body feature, and the 36 Mariner keeps this heritage coming. Do you remember the nineties Santego series?  The 36 Mariner features a clever single level living main deck inside offering a relaxing L-shaped sofa, dining table, and galley.  Below to fore is a roomy owners double with en-suite head facilities.  Another nice feature of the 36 Mariner which comes from larger boats is also the forward settee located on the fore deck, something not seen much in modern cruisers of this size.  The aft deck of the 36 Mariner is left free, but the sun deck area where the helm is located features three bench settees, with a table in the middle.  Power is from four choices from Crusader, Yanmar, and Volvo from 200 up to 375hp in petrol gasoline or diesel power.  The twin Yanmar 315hp is the diesel option.

www.carveryachts.com 

Mew Model: Clipper 50 Hudson Bay

A new challenge for down under Clipper motor yachts, who with the Hudson Bay series presents a mix up of traditional looking modern function down East lobster boat inspired yacht.  The Hudson Bay series is so far offered in two models; the 54 first project presented currently under development, and the 50 number one launch of the series taking to the water past March.  A different product from the more explorer Cordoba series offered by Clipper, although the same hull type of semi displacement design is offered in the Hudson Bay series.  But with a faster speed. The 50 Hudson Bay is first of all a very functional yacht with two layout choices available to the buyer, from the standard three cabins with owners stateroom to fore, or a two suites format which moves the master to midships.  Another interesting feature is also the choice of the helm station located to starboard, or central in the optional layout.  To like in the 50 Hudson Bay, is the galley located astern of the main deck saloon which thanks to the pivoting window of the patio door, becomes also part of the aft deck.  Power is from twin standard Yanmar 440 or optional 480hp which give a 26 knots max, 16 cruise, and a long range 8 knots economic run.  

Technical Data:

LOA - 16.02 m (52.5ft)

Beam - 4.69 m

Draft - 1.1 m

Displacement - 19 t

Fuel Capacity - 1892 l

Water Capacity - 567 l

Accommodation - 6 berths in 3 cabins, 4 berths in 2 cabins

Engines - 2 x Yanmar 440hp, 480hp

Propulsion - line shaft

Speed - 26 knots max, 16 cruise, 8 economic

Hull Type - semi displacement

Construction - Hand laid molded fiberglass with solid keel, and chines

www.clippermotoryachts.com.au

Improve-it = Fiart 33 Seawalker

Fiart clients ask, and the South Italian boat builder responds.  This is in synthesis how the press release for the new central hard top option on the 33 Seawalker was introduced on the official Fiart web site.  The 33 Seawalker introduced in the 2011 fall has a size which puts in the tax free small dimension Italian legislation. But the Seawalker is a twin engine diesel or petrol gas, and has also an interior which sleeps four in a two-plus-two cabin arrangement.  In this we see Fiart follow other Italian builders in the hybrid cross over center console sport cruiser which seems to have a growing interest in Italy and Southern Europe especially in the thirty to forty feet size.

www.fiart.it

New Model: Hinckley T48 Talaria FB

Hinckley released the other version of the T48 Talaria FB for flybridge just a short time after the hard top Motor Yacht first launched of this completely new very much expected model.  This new FB version builds on all identical features of the hard top Motor Yacht, with the added bonus of a second helm and an outdoor relaxing area on the flybridge.  The fly is reached with a staircase from the aft deck to starboard side, and features an L-shaped settee resting on the left, and a two seat helm station opposite.  Inside same features as the MY version are to be found on the T48 Talaria FB with a two cabins layout plus galley located below decks, and a lounging saloon on the main deck divided from the aft cockpit by the open or closed patio door. Power is from twin Cummins 715hp which give a max speed of 33 knots, and 26 knots cruise.  This being 2 knots less to the T48 Motor Yacht hard top version.
Technical Data:

LOA - 15.6 m (51,6ft)

Waterline Length - 13.6 m

Beam - 4.69 m

Draft - 0.78 m

Displacement - 17349 kg

Fuel Capacity - 2649 l

Water Capacity - 567 l

Accommodation - 4 berths in cabins

Engines - 2 x Cummins QSM11 715hp

Propulsion - Hamilton HJ634 jet drives

Speed - 33 knots max, 26 knots cruise

Hull Type - modified Vee with 19 degrees deadrise aft

Construction - Dual Guard Scrimp, Kevlar Carbon E-glass composite hull with Vinilester resin. E-glass deck,

www.hinckleyyachts.com

Project: C.Boat 18.70 mtr One

C.Boat is a Sicily island located Italian builder on the outskirts of the city Palermo, which started its venture a few years go with a concept mixing Italian flare, semi displacement hull shapes, and a steel construction.  The initial venture of C.Boat was so far above the 24 meters plus Super Yacht size, but now the builder presents an entry level project of just above eighteen meters in length, seventeen in waterline, six in beam dimensions called One.  Again the design as all the range is by architect Mortola and the new small One C.Boat will keep similar characteristics for a Mediterranean yacht of its larger sister with a stylish very elegant line complementing the customisable interior.  The standard plan of the 18.70 meter One is for a three double cabins layout, though fair to say customization is not an option, but part of the process when a new C.Boat is in build. 

www.cboat.it 

Web: Toy Marine New Web Site

Toy Marine which comes from the North West part of Italy presents its World wide web virtual showroom.  Toy was founded in 2002 by Alessandro Novella and Aldo Tomasina, to create a line of traditional looking cruisers and yachts based on the down East lobster boat design.  Ten years later to its founding Toy features a line of six models all designed by Nauta, from the best seller 36 model, to the 110.   Three of the current Toy models are still in project stages, the 13mt Tender, 51 Fly, and upcoming 110 flagship.  Toy new website is available in Italian and English language; and takes you around with the following buttons; Company, Toy 36, Toy Tender, Toy 51 Toy 51 Fly, Toy 68, Toy 110, Toy News, and Contacts Us.  Toy also features a facebook page with a direct link from the web site.

www.toymarine.it 

New Model: Sunseeker 28 Metre Yacht

Sunseeker definitely shows a lot of innovation pursuit in this new model which was officially presented at the start year January held London boat show.  To sum it up shorty the 28 Metre Yacht by Sunseeker makes most other modern looking yachts look old.  This new pocket sized super Sunseeker yacht is innovative in many areas, you can start by the use of Kevlar materials for the upper structure, the loads of glassed window surfaces in all areas, the settee and sun bed filled fore deck area, and active fin stabilizers for stability at anchor or slow displacement speeds.  Inside Sunseeker 28 Metre Yacht again show pursuit of innovation with a layout which has separate entrances for the forward located VIP suite and owners stateroom which are in the forward part of the lower accommodation deck, to the central midships two other guest cabins. Spaces abound in this new Sunseeker which makes them seem also larger thanks to the huge large windows everywhere which makes for all areas being all natural light filled.  Power is from twin MTU 1950hp which will give a 29 knots max.  But other smaller engine options are available, although Sunseeker does not say what they are.  

Technical Data:

LOA - 28.15 m (92.1ft)

Beam - 6.50 m

Draft - 2.13 m with props

Displacement - 76100 kg medium load

Fuel Capacity - 9000 l

Water Capacity - 1500 l

Accommodation - 8 guest berths in 4 cabins, 4 crew berths in cabins

Engines - 2 x  MTU 12v2000 1950hp

Propulsion - line shaft

Speed - 29 knots max, 23 knots cruise

Range - 400 nautical miles at cruise

Construction - hand laid fiberglass with vinilester resin skin, and powder pound mat. Balsa cored hull topsides, and foam cored deck  

Certification - CE

www.sunseeker.com

Project: Tarquin Trader 585 Sunliner

Showed in conjunction with the 48 Signature the Tarquin Trader 585 Sunliner will be the bridge which fills a gap in the current range of this builder. The initial renderings show the 585 Sunliner as traditional to the DNA of this British company, that is as an aft cabin motor yacht, with a very big boat feel to it.  This is further shown in the huge flybridge, very wide and safe side decks, and the tender stowage up top.  Live aboard features are standard in nearly all Trader models, so you definitely will have the same in the 585 Sunliner, which will be fourth in size model behind the 75, 70 Motoryacht, and 64 of the same range.  So far Trader has not shown any interior plans, and not even mentioned engine power.  But do accept a semi displacement hull as in nearly all Tarquin Trader models, minus the recently introduced 38 Sprint.

www.tradermotoryachts.com

New Model: Steeler NG50

In recent years Dutch builders of medium sized craft have been getting high global interest. Steeler is one of these builder who in recent months has launched two new models the NG43 and 50.  After showing the medium sized new 43 a few weeks ago, now is turn of the large and current Steeler flagship NG50.  As all Steeler, and as the name says it all the NG50 is a steel constructed conservative looking sport yacht, which never looks out of fashion.  So far Steeler have delivered two NG50 with hull two being an eye catching bronze color and more modern minimal finish inside, featuring oak and Wenge against the maple woods of hull one.  Interior standard plan of the NG50 is standard with a three cabins layout, with owners room to fore, two double cabins to midships, and a saloon and galley in between.  Engine have also been different in both models; with hull one having a single 264hp Yanmar more an inland waterways package, and number two twin Steyr 280hp.        

Technical Data:

LOA - 15.4 m (50,5ft)

Hull Length - 14.99 m

Beam - 4.70 m

Draft - 1.10 m

Displacement - 21000 kg

Fuel Capacity - 1200 l

Water Capacity - 750 l

Accommodation - 6 berths in 3 cabins

Engines - 1 x Yanmar 264hp, 2 x 280hp Steyt Daimler

Propulsion - line shafts

Speed - 13 knots cruise

Construction - steel

www.steeleryachts.com